What Parts From the MaxxFan Plus Roof Vent # MA99FR Fit MaxxFan Deluxe Roof Vent # MA00-07500K?

Question

Question:

I currently have a MaxxFan Deluxe made in 2018 MA00-07500K Rather than buying parts if I purchase your MA99FR Replacement fan I would use the MA99FR for spare parts. What parts from the replacement unit will be compatible with my MaxxFan Deluxe. 1 The 12 volts motor? 2 The fan blade? 3 the motor to open and close the lid ? 4 The circuit board ? 5 The bug screen? 6 The lid and its gasket 7 ??? Thank you

asked by: Paul D

0

Expert Reply:

Here is a list of all the parts from the Replacement MaxxFan Plus 10-Speed Roof Vent # MA99FR which will fit your MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-07500K.

Replacement Round Screen for Maxxair RV Roof Vents # MA05-30925
Replacement Lift Arm for MaxxFan Roof Vents # MA10-20222KS
Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents # MA10-20281K-1AF
Replacement Lift Motor for Maxx Fan Plus Roof Vent # MA10-20270
Replacement Control Plate for MaxxFan Roof Vent # MA05-20226K

expert reply by: Bud M

0

Answer 1

To determine whether or not the DeeZee Red Label 5th Wheel Toolbox #DZ8560WB will allow the use of a tonneau cover you will first need to see what kind of clearance you have from the top of the tool box to the top of your bed rails. I called BAK and…

view full answer...

Answer 2

I was able to confirm with MaxxAir that the Replacement Control Plate for MaxxFan Roof Vent part #MA05-20226K is correct for a MaxxAir Vent Fan Model 4951KSC. The key pad holes are only used on certain models so if yours does not have this they will…

view full answer...

Answer 3

The #PD4590LICSV converter would indeed be the correct Lithium compatible upgrade for your existing PD4590K18NS2 4500 series RV Power Control Center. I've confirmed this with Progressive Dynamics. I've linked to a product description and an…

view full answer...

Answer 4

For the Progressive Dynamics 4500 series converter the correct part you need to convert to a lithium profile is the part #PD4590LICSV which will provide your Lithium battery setup with the correct higher voltage to charge safely.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

What Parts From the MaxxFan Plus Roof Vent # MA99FR Fit MaxxFan Deluxe Roof Vent # MA00-07500K?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching