Recommended Trailer Hitch Receiver and 4-Way Wiring Harness For a 2022 Mazda CX-30

Question

Question:

Which receiver do you recommend for the 2022 Mazda CX30?

asked by: Kim

0

Expert Reply:

I recommend installing the Curt Trailer Hitch Receiver # C49CR on your 2022 Mazda CX-30. This receiver is made in the USA with a hidden cross tube design giving you a clean, factory appearance.

The T-One Vehicle Wiring Harness # TK67FR will provide you a 4-way flat connector. This will connect the trailer lights of most small trailers you might tow. It can also be used with Auxiliary Lights # C53201 in the event you have a hitch mounted accessory like a bike rack which impairs the view of your tail lights to other drivers.

expert reply by: Bud M

0

Answer 1

Hello Lynn thanks for your question. I will start by telling you that unfortunately, it is really not going to be possible to carry a Kuat 4 bike platform rack on a 2024 Mazda CX30. Since it is a smaller car, the only hitch available uses a…

view full answer...

Answer 2

For your 2023 Mazda CX-30 we have the Curt #C49CR. This is a Class I hitch with a 1-1/4" receiver. It has a tongue weight capacity of 200 lbs which should be plenty for your bike rack. You will need to make sure your bike rack is Class I…

view full answer...

Answer 3

I have another option for you but since the Hollywood Racks Destination Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount #HLY94FR does not tilt you would have to remove your bikes and fold down the mast to open the rear hatch on…

view full answer...

Answer 4

I'd be happy to help out! The perfect bike rack for your situation is the Hollywood Racks Destination: - Hollywood Racks Destination Bike Rack #HLY94FR This is honestly one of the most underrated bike racks that we carry, but it fits most…

view full answer...

Answer 5

For your 2021 Mazda CX-30 that has the Curt hitch #C49CR installed I really like the Swagman XTC2 part #S64670 for a really solid bike rack that is also a great value. This would not require the use of a stabilizer strap either.

view full answer...

Answer 6

Yes, your 2021 Mazda CX-30 is compatible with the 2-bike version of the Hollywood Destination, the Hollywood Racks Destination Bike Rack for 2 Bikes #HLY94FR. Then for a trailer hitch on your '21 CX-30 you would need the Curt Trailer Hitch…

view full answer...

Answer 7

There is a trailer hitch receiver that fits your 2020 Mazda CX-30, the Curt Trailer Hitch Receiver #C49CR. This is a bolt-on installation that doesn't require any type of trimming of the fascia or bumper of your CX-30. The #C49CR is a Class I…

view full answer...

Answer 8

The trailer hitch that I recommend for your 2022 Mazda CX-30 is the Curt Trailer Hitch Receiver #C49CR. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a Class I, 1-1/4" hitch receiver for hitch…

view full answer...

Answer 9

I do have a solution for you but the only trailer hitch options we offer for a 2023 Mazda CX-30 are class 1, 1-1/4" like the Curt Trailer Hitch Receiver part #C49CR which is what I recommend. That said, as you mentioned you can use a 1-1/4"…

view full answer...

Answer 10

For locating an installer for the Curt Trailer Hitch Receiver #C49CR on your 2021 Mazda CX-30 we have added a "Locate installers near me" link on our product page just below the images and videos of the product. By using this link it allows…

view full answer...

Answer 11

The Hollywood Racks Trail Rider part #HR200Z has a solid amount of clearance between its hitch pin hole and nearest wheel hoop at 12-1/8 inches and is priced great as well.

view full answer...

Answer 12

The Curt Trailer Hitch Receiver part #C49CR which is a fit for a 2021 Mazda CX-30 does not require any drilling for installation. You do need to enlarge access holes which basically means opening up pre-existing holes slightly more so the hardware…

view full answer...