Recommended Roof Rack for a 2023 Jeep Grand Cherokee L w/ Side Rails

Question

Question:

I am purchasing a 2023 Jeep Grand Cherokee L with side rails running along the roof. I would like to add a set of crossbars to mount my cargo box. Is there a set that will work for my Jeep?

asked by: Nathan

0

Expert Reply:

There is a set of crossbars that will fit the factory side rails of your 2023 Jeep Grand Cherokee L. It is the roof rack by Rhino Rack and it includes the following parts:

Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2 item # RRVA126B-2

RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms - Fixed Mounting Points - Qty 4 item # RRRCL4

Custom RCP Fit Kit for 4 Rhino-Rack RC and RV Series Roof Rack Legs - Fixed Mounting Points item # RRRCP64-BK

This aero bar roof rack system has a 165 lbs capacity. The included locks will prevent theft. The rubberized vortex strips in the top channels dramatically reduce drag and wind noise.

I have linked a couple of pictures, along with a video, that will show you what this system will look like when installed on your Grand Cherokee L.

expert reply by: Jerred H

0

Jeep Grand Cherokee L Rhino Rack Crossbars
(click to enlarge)

Rhino Rack Roof Rack Jeep Grand Cherokee
(click to enlarge)

Answer 1

Yes, there is a set of crossbars that mounts directly to the factory side rails of your 2023 Jeep Compass. You will want the roof rack by Rhino Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black -…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount like #RTC16 will work with the Thule Tracker II feet. The Rhino-Rack Tracks are the same size as the Thule tracks.

view full answer...

Answer 6

Hey Joe, I have the following component recommendations for your 2023 Jeep Grand Cherokee L Overland: Baseplate: Blue Ox Base Plate Kit #BLU68CR Tow Bar: Blue Ox Avail Non-Binding Tow Bar #BX7420, This will also include safety cables so you won't…

view full answer...

Answer 7

Thank you for your purchase of the Kuat NV 2.0 Bike Rack #NV22G! When it comes to lighting I have an alternate solution to what you're asking with the following parts: Curt Auxiliary LED Indicator Lights - #C53201 Thule License Plate Holder for…

view full answer...

Answer 8

When the Kuat Transfer V2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches #KU74FR is in the folded position with the shank also folded upright, it measures 46-3/4" wide and 30-5/8" long (see attached photo). In case you were…

view full answer...

Answer 9

To replace the hitch pin of your Kuat Transfer V2 Bike Rack #KU84FR you can use the Hitch Lock for Kuat Bike Racks - 2" Hitches #HL2. This hitch pin comes with a lock so that you can also prevent anyone from taking off with your bike rack.

view full answer...

Answer 10

There are no roof rack options if your 2012 GMC Yukon Denali already has factory crossbars. It is possible that something would fit the side rails that run front to back but none of the manufacturers have tested that. I think part of the issue could…

view full answer...

Answer 11

The only difference between the #HL1 and #HL2 hitch lock is the diameter. HL1 is 3/8" in diameter and the HL2 is 1/2". Measure the diameter of the hole you have to see which one is closer. If the hole is more than 1/2" you can use…

view full answer...

Answer 12

If you have the Kuat Transfer V2 Bike Rack for 2 Bikes #KU84FR then the correct add-on to convert it to a 3-bike carrier is 1 Bike Add-On for Kuat Transfer Bike Racks #KU57FR.

view full answer...