2023 Hyundai Kona Curt T-Connector Fitment

Question

Question:

Will the C53ZV fit the 2023? Are the T connectors the same?

asked by: Michel

0

Expert Reply:

Yes, we have confirmed with Curt that the T-Connector Vehicle Wiring Harness # C53ZV will fit with the tail lights on your 2023 Hyundai Kona just fine.

expert reply by: Jon G

0

Answer 1

I checked with Curt and their trailer wiring harness part #C99KR is a confirmed fit for the 2023 Hyundai Kona ev as it is a fit for all models.

view full answer...

Answer 2

If you leave the bolt in the frame you most likely wouldn't ever notice that it was there, but there's a small chance you could hear it rattle around. If you have one of those telescoping magnet tools for retrieving lost bolts that may be…

view full answer...

Answer 3

The extra wire in the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C99KR that you run to the battery powers the converter box so that it won't overload the tail light circuit and blow the fuse or cause the tail…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

2023 Hyundai Kona Curt T-Connector Fitment

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching