Tailgate Lock Options for a 2004 Ford Ranger

Question

Question:

where can i get a tailgate locking handle for a 2004 ford ranger?

asked by: P.g.

0

Expert Reply:

I have tailgate locks that were designed to work with the OEM tailgate handle on your 2004 Ford Ranger, but I do not have a complete replacement locking tailgate handle.

For a tailgate lock, we have three options for your truck. For a manual lock, you can use the Pop and Lock Custom Tailgate Lock, # PAL2310 (Black) or # PAL2310C (Chrome). There is no drilling required to install this lock and it provides a factory appearance.

We also offer the Pop and Lock Custom Tailgate Lock, # PAL8200. This is a powered tailgate lock that works with the existing power door locks on the truck. If you are interested in this lock, but your truck does not have power door locks, you can add the Switch Kit, # SK700. The lock and the switch kit come with all wiring and hardware needed for the installation.

expert reply by: John H

0

Answer 1

Yes you can! The Thule UpRide Roof Bike Rack part #TH599000 comes with both types of hardware. There is hardware for mounting it to the track in the aero type bars and clamps for mounting to the round, square and factory type crossbars like the…

view full answer...

Answer 2

The manual for the iRV36 states to hold the power button for 5 seconds to reset the unit. Since you've already tried that I recommend pulling the unit from the wall and removing the fuse to cut the power to the unit. This will allow the unit to…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 9

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 10

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Tailgate Lock Options for a 2004 Ford Ranger

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching