What is Purpose of 12 V Car Adapter GN87FR for Ignik Backside Heated Seat Pad

Question

Question:

Im unclear about the GN87FR cord mentioned on the page. Whats the difference in function between that and the cord thats already included?

asked by: Tommy S

0

Expert Reply:

The heating pad cord part # GN87FR that you referenced allows the Ignik Backside Heated Seat Pad # GN34FR to heat at a higher level. Basically it allows the heater to draw more current which heats it up further.

expert reply by: Jameson C

0

Answer 1

The Ignik Backside Heated Seat Pad #GN34FR can be folded when in use, but only one side of the pad has the heating element in it so you'd have to fold it so that the orange side is facing up, otherwise you'll be blocking the heat.

view full answer...

Answer 2

The only difference between the Ignik Backside Heated Seat Pad with 12V Car Adapter #GN27FR and the Ignik Backside Heated Seat Pad #GN34FR is that #GN27FR also includes the 12V Car Adapter for Ignik Heated Accessories - 6' Long #GN87FR.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 5

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs…

view full answer...

Answer 6

90-120 ft lbs of torque is probably about right for your trailer rims. If you check out the lug nut torque chart that I attached you will see that nearly all of the torque specs are that and higher.

view full answer...

Answer 7

The Furrion Single Zone Controller part #FACC12SA-BL does have a dip switch setup underneath the cover of it.

view full answer...

Answer 8

The Repair Kit Fulton Wedge-Latch Cast Head Coupler, #F670801, is designed to fit the coupler #BD44125W0317 which does take a 2-5/16 inch ball.

view full answer...

Answer 9

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

Great question, we have all that you need to flat tow your 2022 Yukon XL Denali. I will list the items then the details. Blue Ox Base Plate Kit - Removable Arms #BLU58FR. Blue Ox Avail Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 10,000…

view full answer...

Answer 12

Please note the attached instructions. The Lippert Anti-Billowing Kit for Solera Slide Topper Awnings, #LC78FR should be installed on the end of the awning that is closest to the front of the unit. 1. Make sure awning is fully retracted. 2. Place the…

view full answer...

What is Purpose of 12 V Car Adapter GN87FR for Ignik Backside Heated Seat Pad

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching