Recommended Class I and II Bike Rack for a 45 lbs E-Bike

Question

Question:

We have two ebikes we would like a new carrier for. Without batteries attached, one weighs at 44 pounds, the other at 33 pounds. In spite of the larger one being more than the 40 pounds, would it still be possible to use this rack for these two bikes?

asked by: John B

0

Expert Reply:

I have a solution for you and a better bike rack altogether that will save you some money but the RockyMounts WestSlope Bike Rack for 2 Bikes item # RKY10222 has a capacity of 40 lbs per bike. No matter how much your second bike weighs you don't want to go over the listed capabilities of the rack. Doing so would violate the warranty and in the event of a parts failure you would not be protected from liability.

Instead I recommend using the Hollywood Racks Trail Rider Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches item # HR200Z. This bike rack will also fit 1-1/4" - 2" hitch receivers that are Class I, II, or III.

The Trailer Rider bike rack has a 45 lbs capacity per bike. It includes a keyed-alike hitch lock and frame hooks that secure your bike and the rack from theft. You will want to mount your heavier bike closest to your vehicle.

I have linked a review video below.

expert reply by: Jerred H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 4

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 5

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 6

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

I have the perfect bike rack for your Electra Townie and for this I recommend the Saris Freedom 2 Bike Platform Rack part #SA4412B. The reason I recommend this bike rack over the Malone rack is because you don't need to use an adapter bar at all.…

view full answer...

Answer 9

I can help you choose between the Kuat Sherpa 2.0 and Kuat Transfer V2, as both are really nice bike racks. Let me start off, since you mentioned 3-bike rack, if that's what you were after you would need the Kuat Transfer V2 Bike Rack for 3 Bikes…

view full answer...

Answer 10

Either the Kuat Tranfer 1 #KU64FR or the RockyMounts MonoRail Solo 1 #RKY10007 would handle the bikes you describe easily. Both would hold the bikes by the tires, so the fact that the rack won't come into contact with the frame will work well…

view full answer...

Answer 11

The Tow Defender #RM-4700 you found is really our best option to protect the front of your 2024 Chevrolet Trax. This screen helps to deflect any road debris back down to the ground to keep it traveling under your Trax. This particular cover is…

view full answer...

Answer 12

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Recommended Class I and II Bike Rack for a 45 lbs E-Bike

Products Referenced in This Question

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching