How Thick is the RV Roof Repair Tape

Question

Question:

What is the thickness of this roof repair tape?

asked by: Steve

0

Expert Reply:

The RV Roof Repair Tape # QR64FR is 30 mils or 0.03" thick.

expert reply by: Scott S

0

Answer 1

The Dometic Ultra Breeze Trailer Roof Vent Cover part #DMC38FR installs using brackets which secure to the vent lid flange. The brackets are screwed into the roof but the cover is attached to the bracket using pins and is easily removeable. I have…

view full answer...

Answer 2

I recommend the Alpha Systems Butyl Tape for RV Weatherproofing #AL28FJ as it's 1" wide to fully cover the flange of your vent. Make sure you overlap the ends to form a tight waterproof seal. You can see me doing this at 2:50 mark in the…

view full answer...

Answer 3

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 4

Although I would not be able to speak on the installation of the part(s) you received for your trailer, I can tell you that the TremPro 644 Silicone Sealant part #0160297 will do an excellent job of sealing your new aluminum panel to the trailer and…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

I do have an alternative for you since the u-bolts included with the CE Smith Post-Style Guide-Ons #CE27637 will only fit up to a 5-1/4" tall frame. Instead we have the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System. This is superior…

view full answer...

Answer 7

Hi Donald, For a 150" flange to flange measurement you'll need the Solera RV Slide-Out Awning #LCV000163299. This slide topper is designed to fit 146" - 151" flange to flange measurements. Going a size larger than this could…

view full answer...

Answer 8

The 171317 steps are no longer being manufactured, but we do have a replacement gear plate as part #LC301696, motor part #LC301695, and controller part #LC301702.

view full answer...

Answer 9

The lowest profile roof vent we have that has a fan built into it was the MaxxFan Roof Vent w/ 12V Fan #MA00A04301K which when closed sticks up 4-1/4 inches from the roof it's installed on. (edit: now the lowest profile is the part #MA00-04301M…

view full answer...

Answer 10

Did you have a 4-pin connector that had 5 wires or was it a 5-pin connector? There is a big difference since you normally see a 5-pin connector on a boat trailer with the 5th pin used for an electric reverse lockout solenoid on a brake actuating…

view full answer...

Answer 11

For the Alpha Systems Alphabond Repair Tape for RV Roofs #AL32KV the adhesive is 23 mils while the TPO facer is 4 mils and the release liner is 2 mils. I confirmed this directly with my contact at Alpha Systems. Attached is a review video for you to…

view full answer...

Answer 12

Installation hardware is not included with the Swivel D Ring part #RR06 due to the unknown nature of the surface that the end user will attach it to. Depending on the weight of the object that will be held down, and the thickness of the surface it…

view full answer...

How Thick is the RV Roof Repair Tape

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching