Replacement Vent Cover Lid for Fan-Tastic RV Roof Vent Lid 4000BT

Question

Question:

I have a Fan-Tastic 4000BT vent fan in my motor home. I need to replace the outside vent cover I have not been able to find a replacement product that works with my model on your website Can you help? Thanks

asked by: Rick

0

Expert Reply:

The needed replacement part in smoke/tinted is, # FVK1020-19; this fits all 4000 series units like what you have on your motorhome.

expert reply by: Jameson C

0

Answer 1

Yes, it looks like your existing Fan-Tastic Fan model 4000BT is a standard 14" wide x 14" long roof vent so the MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat part #MA00-05100K would fit the opening for your old vent as long as the roof…

view full answer...

Answer 2

I pulled the Double Roller Catches with Prongs for RV Cabinets #37270235 from the warehouse and drew up a little diagram with the measurements of the roller bracket and also attached the picture Michael made of the catch.

view full answer...

Answer 3

Yes, the Replacement Fan Motor Assembly Kit #FVK8017-00 is the correct motor replacement for your Fan-Tastic 4000BT roof vent.

view full answer...

Answer 4

Looks like the correct replacement vent lid you would need is the part #FVK1020-19. This is the correct replacement vent lid for Fantastic roof vents like yours.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 8

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 9

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 10

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 11

Hey Paul, we have a Blue Ox base plate kit that fits your 2024 Nissan Versa with the part #BX1856. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle.…

view full answer...

Answer 12

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Replacement Vent Cover Lid for Fan-Tastic RV Roof Vent Lid 4000BT

Product Page this Question was Asked From

Continue Researching