2-5/16" Hitch Ball For Trailer Valet XL Tow Dolly # TVXL2

Question

Question:

My valet tips everytime we lower the trailer. The ball on the valet is 2 inches and the trailers 2 5/16. Would that be an issue

asked by: John R

0

Expert Reply:

Yes, you want the ball size to match the coupler on your trailer. We do have the 2-5/16" Hitch Ball w/ Base # TVBB25 that you can use with your Trailer Valet XL Trailer Dolly # TVXL2 with the 2" ball. This would help you to reduce the valet from tipping as the ball will fit snuggly in the coupler.

expert reply by: Bud M

0

Answer 1

I would first double check to make sure that everything is installed properly. The hitch ball that comes with the Trailer Valet XL #TVXL2 has a base that you spin to lock your unit to the coupler so that it sits straight. If you have an older version…

view full answer...

Answer 2

The Trailer Valet V2 Trailer Dolly with Chain Drive - 2" and 2-5/16" Hitch Ball TVXLV2 has been discontinued by the manufacturer. It did come with the 9 inch solid tires, the stabilizer bracket, and the coupling plate. The Trailer Valet XL…

view full answer...

Answer 3

From the picture that you sent (thank you for that) and the way that you are describing that the Trailer Valet XL #TVXL2 is moving I would have to say that you might not be installing the Trailer Valet XL properly on your coupler. I have attached a…

view full answer...

Answer 4

The Trailer Valet XL Trailer Dolly with Chain Drive #TVXL2 has the 2 inch ball. If you already have the Traler Valet and just need the 2 inch ball, then you will want #TVHB2 or the base and ball #TVBB2.

view full answer...

Answer 5

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 6

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 7

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 8

The Hayes Air Actuated Trailer Brake Controller - 1 to 4 Axles - Proportional #HA100400C mounts to the inside of your 2007 Nemar Essex at the dash just like other electric brake controllers will. It needs to be installed on the inside of the vehicle…

view full answer...

Answer 9

According to my research, AL-KO 8490 references an AL-KO hub for 3,500 lb axles with a 10 x 2-1/4" drum and a 5 on 4-1/2" bolt pattern. For a drum assembly that will work with these hubs I recommend taking a look at the Electric Trailer…

view full answer...

Answer 10

Good news, I can help you find a tire for your Sundown Horse Trailer. The 205/90-15 is a close tire size to the 7.00-15. The closest size to a 7.00x15 tire that we offer would be a 225/75-15. One 225/75-15 tire that could work for you is the Kenda…

view full answer...

Answer 11

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

2-5/16" Hitch Ball For Trailer Valet XL Tow Dolly # TVXL2

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching