Replacement Drum Assemblies for AL-KO 8490 Hubs
Question:
I need a replacement brake drum assembly the number on the Hub is AL - KO 8490 5 no 5 lug pattern
asked by: Timothy M
Expert Reply:
According to my research, AL-KO 8490 references an AL-KO hub for 3,500 lb axles with a 10 x 2-1/4" drum and a 5 on 4-1/2" bolt pattern. For a drum assembly that will work with these hubs I recommend taking a look at the Electric Trailer Brake Kit part # AKEBRK-35-SA for self-adjust or part # AKEBRK-35 for manual adjust.
If you would also like to replace the hub then as long as your existing AL-KO hub uses an L68149 inner bearing and an L44649 outer bearing, the Trailer Hub and Drum Assembly part # AKHD-550-35-K for a 5 on 5 bolt pattern or part # AKHD-545-35-K for a 5 on 4-1/2" bolt pattern would work well for you. I have attached an article that will show you how to measure your hubs for the correct bolt pattern.
I have also attached a review video for all of the above parts for you as well.
Products Referenced in This Question
etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Dacromet - 5/8" Bolts - 8,000 lbs
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Shop: Kodiak Disc Brake Caliper - E-Coat - 7,000 lbs to 8,000 lbs
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Roof Rack
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: 8~288~3
- Shop: Replacement Female Pipe for etrailer and Ram Pipe Mount Swivel Jacks - 5/8" Pin Hole
- Shop: Grease Seal
- Search Results: al~ko 8490
- Search Results: tjd2sp~12000sp~f
- Search Results: 8~219~18uc3
- Search Results: 9~44~1
- Search Results: propane bracket
- Search Results: 9~44
- Shop: Trailer Wiring
- Q&A: Replacement Grease Cap and Wheel Studs for a RV Trailer Hub with ALKO Electric Brakes
- Video: etrailer Trailer Brakes AKEBRK-35R-SA Review
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Trailer Hub and Drum and Brakes for AL-KO 8490 Axle
- Shop: Vehicle Tow Bar Wiring
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Q&A: Replacement Axle for AL-KO T35 3,500 Pound Axle with 85 Inch Hub Length
- Video: etrailer Electric Trailer Brake Assembly Installation
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-EZ-K
- Shop: Suspension Enhancement
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Video: etrailer Hub And Drum Assembly Installation
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35-SA Review
on Trailer Brakes
