Lift Kit Recommendation for 2017 Geo Pro 19FBS

Question

Question:

what lift kit do I need for the 2017 GEOPRO 19fbs for better clearance

asked by: Rick

0

Expert Reply:

Your 2017 Geo Pro 19FBS has the Dexter Torflex axle so you'll likely need the Torflex Lift Kit # K71-707-01 which is designed for a #10 Torflex axle with 2,300 to 4,000-lb capacities that don't have 3" high profile or Norco brackets. If you can confirm that's the axle kit you have then this can be used and will give you a 2-5/8" lift!

Attached is a review video for you to check out.

expert reply by: Jon G

0

Answer 1

I have a great option for you. When using the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers #CC-275 there are a few parameters you will need to stay within. The bike rack needs to be travel trailer rated, fit a…

view full answer...

Answer 2

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 3

Both of the ARK stabilizer jacks #ARK94FR and #ARK87FR can rotate 90 degrees forward and back so in a way it is 180 degrees like you asked about. The difference is the #ARK94FR has a square tube and #ARK87FR has a round tube. These are both going be…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 6

I reached out to my contact at Demco who was able to supply me with the attached dimensional photo of the Demco A-Frame Trailer Coupler #DM14793-95.

view full answer...

Answer 7

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hey Joe, yes the Lippert stabilizer jack part #LC298707 does fit your Grand Design Transcend 245RL but it is sold individually so if you wanted a set for the front and the rear you would need to order a quantity of two.

view full answer...

Answer 10

If you look at the photo I edited for you, you will be able to see all the dimensions of the mounting tabs on the top of the Ultra-Fab #UF48-979006 Scissor Jack.

view full answer...

Answer 11

Hey Chad this is a great question. So the MORryde ALLTREK part #MR89DR does offer additional vertical suspension but it does sit a little taller than the equalizers it replaces so you wouldn't have to worry about your tires hitting fenders or…

view full answer...

Answer 12

The AllTrek 4000 kits provide the best cushioning so if you were to upgrade from your CRE3000 kit to the Alltrek you would see a big improvement. If you have a 35 inch wheelbase you'd want the part #MR29DR or if you have a 33 inch wheelbase…

view full answer...

Lift Kit Recommendation for 2017 Geo Pro 19FBS

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching