What Is The Max Height Fully Extended On The Xtreme Off-Road Trailer Jack # ORJW750BD

Question

Question:

Max Height with full extension

asked by: Scott P

1

Helpful Expert Reply:

The Xtreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels # ORJW750BD has an extended bracket height of 29-5/8 inches. The maximum height when moving a trailer is 23-1/2 inches. It has a static load capacity of 1,650 pounds and has a dynamic load capacity of 1,100 pounds.

This jack has a bolt-on installation with the hardware included and has a sturdy steel construction that is durable and built to last. It has a rust-resistant black powder coat that has a 600 hour salt spray rating.

I attached a review video link below.

expert reply by: Noah E

1

Answer 1

The Ark jack you referenced would not go up high enough for the height of your trailer but we do have the similar Ark jack part #ORJW750BD that can go up several inches taller and would work for you.

view full answer...

Answer 2

Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.

view full answer...

Answer 3

The diameter of the pull pin that holds the #ARK47FR jack in place on the mounting bracket is .5512".

view full answer...

Answer 4

Stabilizer jacks are not designed to carry the full weight of trailer so I can not recommend using them as a way to hold the trailer when you work on it. Having it connected to your truck would be the way to go.

view full answer...

Answer 5

Since we don't have a jack quite tall enough for you really tall trailer the best option we have would be the #ORJW750BD with the wheel chock for jacks part #FT11933MI to help take up the extra room.

view full answer...

Answer 6

The side mount bolt on ARK Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D has a similar height adjustment to the Ultimate Trailer Jack #322-RDJ-2K. The ARK jack does have a dual wheel and 1,650lb capacity versus the plate and 2,000lb capacity of the…

view full answer...

Answer 7

I have a couple options for you to consider as no one makes a jack that will bolt on in place with your Shelby 4587 jack bracket you have welded to your frame. First the Round Swivel Marine Jack w/ Wheel #MJ-1200B is the closest we have to the design…

view full answer...

Answer 8

I have a solution to your question. For the Dutton-Lainson Bolt-On, Drop Leg Trailer Jack, #DL22320, I have attached a photo of the mounting bracket. We have measured the bracket and the distances of the mounting holes and marked them for you in the…

view full answer...

Answer 9

The mounting plate on the Dutton-Lainson Round Swivel Jack part #DL22335 has bolt holes which are 7/16" diameter. The bolt holes are spaced 5-1/2" apart on center from top to bottom and then in 1" increments apart working your way from…

view full answer...

Answer 10

The Dutton-Lainson Square Swivel Jack #DL22340 has a mounting plate designed to fit trailer frames with a height of 3" - 5". I have attached a dimensional drawing below with all of the bolt spacing for your reference.

view full answer...

Answer 11

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

What Is The Max Height Fully Extended On The Xtreme Off-Road Trailer Jack # ORJW750BD

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching