Replacement for Venture M-9000 PK Landing Gear Motor

Question

Question:

I have a m 9000 pk landing gear motor but want something stronger what do you suggest

asked by: Dave

0

Expert Reply:

The correct replacement for a Venture M-9000 PK Landing Gear Motor is the Lippert Venture 5th Wheel RV Landing Gear Motor part # LC142178 or you can upgrade to the Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor part # LC196308 which has a higher capacity.

expert reply by: Conner L

0

Answer 1

We have just what you need to replace your landing gear motor M9000PK with the #LC196308 and you'd be set! This is a confirmed fit for what you have and is a faster motor too so your jacks will raise and lower quicker.

view full answer...

Answer 2

There is a heavier-duty option to replace the Venture M-9000-PK landing gear motor than the 5,000 lb capacity Lippert Venture 5th Wheel RV Landing Gear Motor #LC142178. While that is the correct fit, if you want a higher rated capacity you can…

view full answer...

Answer 3

Yes, Lippert motor #LC142178 is the correct replacement motor for the Venture M-9000 PK motor for Venture landing gear. It is possible that the new motor will show a different serial or model number on its sticker but it is the correct replacement. I…

view full answer...

Answer 4

If your landing gear operates, but operates very slowly, after you replaced the gear box then chances are that you may have a weak ground connection that is preventing full current from reaching the motor. Unless you hear bad noises from the landing…

view full answer...

Answer 5

The correct replacement gear box for your Venture M-9000 landing gear motor is the part #LG-179015.

view full answer...

Answer 6

The Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor #LC196308 will indeed fit your landing gear without modification. It will have the same bolt pattern as the #LC142178 you currently have, but will definitely have a higher capacity. If you…

view full answer...

Answer 7

For your landing gear with a motor part number M-9000-PK what you'd need for a gear box replacement is the part #LG-179015. This is an aluminum gear box too which will be a bit stronger than the plastic ones found on most setups.

view full answer...

Answer 8

Essentially the #LG-196308 and the #LC196308 are identical. I'd go with the lower priced of the two since neither is a better choice than the other.

view full answer...

Answer 9

The correct replacement gear box for your Venture M-9000 landing gear motor is the part #LG-179015.

view full answer...

Answer 10

For the gearbox on your 2008 Forrest River Sandpiper I recommend the Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies #LC276602. The aluminum casing is far more sturdy than the plastic housing options. If you…

view full answer...

Answer 11

The Stromberg Carlson Replacement Motor #LG-196308 and the Lippert HD Motor #LC196308 referenced in your question are essentially the same motor. They can be used interchangeably on a landing gear system. With this in mind, I simply recommend…

view full answer...

Answer 12

To replace your existing Venture motor, the Lippert Components Venture 5th Wheel RV Landing Gear Motor #LC142178 is the correct replacement part for you. For an aluminum gear box, you are correct that you can use part #LG-179015. The #LC142178 motor…

view full answer...

Replacement for Venture M-9000 PK Landing Gear Motor

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching