Replacement Inner And Outer Bearing With Seal For A 1998 Kwik Kamp Camper Trailer

Question

Question:

Have a 1998 Kwik Kamp camper trailer. Usually towed by a motorcycle. Dexter axle 1 1/16. One bearing shows: L44649, no numbers on other bearing. Seal shows: TCM DEXTER 010-009-00 TAIWAN. Looking for 2 sets, inner, outer and seal.

asked by: Richard J

0

Expert Reply:

The Inner bearing and the Outer bearing will be the same at # L44649 they have a 1.063 inch inner diameter. The Inner and Outer Race will be the same # L44610. The correct seal # 10-9 is the seal you will need the 10-9 seal is in cross reference to the TCM Dexter 010-009-00. So you can purchase Bearing Kit # BK1-150 to get all the pieces together.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 5

Chad, the etrailer Trailer Hitch Receiver #e54KR you're looking at is not going to work with your 2023 Subaru Outback Wilderness; Instead, you'd want to use the etrailer Trailer Hitch Receiver #e25TR. This hitch is virtually the exact same…

view full answer...

Answer 6

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...