What Gauge Wire Does TecNiq Mini Round LED Boat Accent Light Use

Question

Question:

What is the wire gauge on item TN76VR?

asked by: Tracie

0

Expert Reply:

The Mini Round LED Boat Accent Light with Cover # TN76VR has 18 gauge wire. When you install this I recommend using the Deka Heat Shrink Butt Connectors # DW05743-5 as the heat shrink wrap will protect your connections better against the elements than a standard butt connector will.

expert reply by: Jon G

0

Answer 1

Hey William, the E6 error on a Furrion wall thermostat indicates an Open circuit Humidity Sensor issue. Most likely the sensor is bad and needs to be replaced as this is a pretty rare error code.

view full answer...

Answer 2

There isn't an exact angle to go off of when it it comes to shackle straps, but we try to them to sit in a 'W' shape to allow for the suspension to travel without binding up. Depending on the length of the shackle straps the angle can…

view full answer...

Answer 3

For the Tecnic 45 degree accent light part #TN42FR the correct mounting cover is the part #TN34FR.

view full answer...

Answer 4

Using compressed air is still the way to go. I have come across many instances of people using this method to push out the piston. And the best part is, it works. If you do not have an air compressor I am sure a local shop would go ahead and do it…

view full answer...

Answer 5

For prices on tires and wheels, all prices are listed on the specific product page. For a wheel/tire combination, it really depends on if you want a radial tire or a bias tire. For a radial tire on the Aluminum HWT 07 Series 5 Spoke Trailer Wheel -…

view full answer...

Answer 6

The Dexter Electric Trailer Brake Kit w/ Parking Brakes #23-112-113 would be a fit for the 5-bolt pattern of the Timbren Axle-Less Trailer Suspension #TASR35HDS06 . Both the Dexter Trailer Hub and Drum Assembly #8-201-9UC3-EZ and etrailer Easy Grease…

view full answer...

Answer 7

The spindle diameter of the Timbren kit part #ASR35HDS02 where the seal rides is definitely 2.25 inch so to go with a disc brake setup for this setup will require a hub that has that size seal. That said, the Kodiak Disc brake kit part #K2HR526DKG…

view full answer...

Answer 8

The best way to determine which replacement shocks will work is by matching up the length of the old ones as close as possible and then also using the GVWR of the trailer. If your brackets are 12-1/2" apart, and the GVWR of your trailer is…

view full answer...

What Gauge Wire Does TecNiq Mini Round LED Boat Accent Light Use

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching