Parts Needed to Add Trailer Charge Circuit to 2014 Honda Odyssey with 4-Way

Question

Question:

Is there a plug to add to the t-one 118521 to use the trailer charging feature thats available on that plug? Should just be an for the wire to attach to. Great product just they included stubs for the rest of the accessories that are on that plug. Thanks for your help.

asked by: Larry B

0

Expert Reply:

To add a charge circuit to the Tekonshah 4-way wiring kit part # 118521 that you referenced the only way is to use the 7-way adapter kit part # ETBC7L which will convert the 4-way to a 7-way and also comes with wiring needed to activate the charge circuit of the 7-way.

expert reply by: Jameson C

0

Answer 1

The reason you want to run the power wire of the #ETBC7L up to the vehicle battery is because this is the circuit that the brake controller draws power from and you want it to bypass all of the vehicle wiring so as to prevent a short from damaging…

view full answer...

Answer 2

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 3

There isn't a plug and play option for a 7-way available, but we have the parts you'd need to complete the installation. You'll need to begin by installing a 4-pole trailer connector. There are two iterations of a 4-pole harness available…

view full answer...

Answer 4

The Autowbrake Electric Brake Controller #3430001 will work well for your trailer. The Husky Center Line Weight Distribution w/ Sway Control #HT32216 is a great option with the brackets mounted 28-1/2" - 30-1/2" from the center of ball…

view full answer...

Answer 5

For the most reliable and safe connection possible, Curt recommends obtaining the power for the controller directly from the vehicle battery and running the circuit through a 30 amp breaker like what's provided with the #ETBC7. This way, you can…

view full answer...

Answer 6

For your 12V wiring to your 7-way, we have people running many different things off that 12V wire. 12 gauge or even better 10 gauge ensures that the power is transferred timely and accurately. We have a kit for brake controllers and 12V wiring for…

view full answer...

Answer 7

Most if not all trailer wiring harnesses/connectors use larger wires for the 12 volt and ground circuits compared to the other circuits (lights). The sockets themselves don't have an amperage rating so you will go by the draw of the things…

view full answer...

Answer 8

With the use of a cargo carrier a transmission cooler is not normally used, but a cooler will prolong the life of a transmission towing or not so it's a great idea for your 2014 Honda Odyssey. We installed the Derale part #D13502 on a 2014 Honda…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...