Availability of 7-Pole Round to 6-Pole Coiled Wiring Harness for RV

Question

Question:

Do you offer a 7 round pin coil cord to a 6 pin round. Our RV has the round 7 pin connector rather than the bladed.

asked by: Russell G

0

Expert Reply:

It sounds like you're looking for tow bar wiring like the # RM-146-7 but with a 7-pole round connector on one end. We don't have an option that comes this way but you can put one together yourself with the right parts. You need the # RM-1046-R for the wiring. Then for the 6-pole you need the # RM-910030-8 and for the 7-pole on the other end the # PK11700.

expert reply by: Robin H

0

Answer 1

To see a couple diagrams that show how the 6-way to 7-way adapter part #47435 is wired up check out the pictures I attached. The 6-way of this adapter has the center pin as the 12 volt circuit. That is the usual circuit that gets moved around on…

view full answer...

Answer 2

I recommend using the Roadmaster 7-Wire to 6-Wire Flexo-Coil Kit #RM-146-7, simply cut off your current 4-Way and rewire with the 6-Way to provide the charge line for your towed using the Battery Charge Line Kit #RM-156-25. The Kit allows up to 15…

view full answer...

Answer 3

If you are installing a charge line from the Roadmaster Battery Charge Line Kit for Motorhomes #RM-156-75 to use the Extension Cord #HM47054, the 12 volt power line will be the one I pointed out in the accompanying diagram. It will be the pin in the…

view full answer...

Answer 4

Both the Hopkins Endurance Flex-Coil Trailer Connector Adapter #HM47053 and the Hopkins #HM47054 referenced in your question feature the same 8 foot long, coiled adapter cord that will connect the 7-Way on your RV to the 6-Way round connector on the…

view full answer...

Answer 5

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...