Powered Single Step that Fits 2010 Winnebago Access 31C

Question

Question:

Hello, Looking for a complete replacement electric step for my 2010 Winnebago Acccess 31C. Single step. Thanks

asked by: Kevin D

0

Expert Reply:

For a powered single step that would fit your 2010 Winnebago Access 31C the Kwikee Electric Step part # LC3711363 would work really great. It comes with everything needed to install including a wall switch as well as an automatic door switch that opens and closes it when the door opens/closes.

expert reply by: Jameson C

0

Answer 1

I contacted Trimark in regards to a replacement part for the Trimark 030-0900. 030-0900 is actually a series number not a specific part number. To find the part number you will need to take the interior handle completely off the unit. On the back…

view full answer...

Answer 2

In order to hook up a Blackstone Tailgater to the quick disconnect port on the side of a trailer you should be able to use the MB Sturgis RV Quick-Connect Propane Grill Hose part #100304-60-MBS or part #100304-120-MBS. I called Blackstone and they…

view full answer...

Answer 3

For your grill, you normally wouldn't use an additional regulator and would just use the high pressure system since you have the flame adjustment knobs to regulate your output. You can use the MB Sturgis Quick Disconnect Propane Adapter Fitting -…

view full answer...

Answer 4

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 7

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 8

For your Glo-Brite 118A amber light the replacement lens that will fit is the Optronics #A44AB; the lights themselves are the Optronics #MC44AB. The Glo-Brite 117R can use replacement lens #A44RB while the light is #MC44RB. I've added links to…

view full answer...

Answer 9

I have a solution that may work for you, but we do not currently have any 3" diameter submersible reverse lights. Have a look at the Optronics Backup Light #BU45CB which is a 4-1/4" diameter light that can be mounted to your trailer using…

view full answer...

Answer 10

Hi Ken; I reached out to Lippert on this and they were unable to find the specific pressure from the #LC689052 testing. It is a large company and sometimes information gets lost across it with other brands like the Flow Max. I would say the pump is…

view full answer...

Answer 11

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

view full answer...

Powered Single Step that Fits 2010 Winnebago Access 31C

Product Page this Question was Asked From

Continue Researching