Correct Wet Bolt Kit for 2017 Forest River Vengeance 40D12

Question

Question:

I would like to upgrade to a wet bolt kit. on my 2017 Forrest River Vengeance 40d12 Touring Edition. Which bolts should I purchase. Thank you

asked by: David T

0

Expert Reply:

The MORryde Suspension Upgrade Kit for Triple Axle Trailers part # MR86ZR for 2-1/4" shackles or part # MR26ZR for 3-1/8" shackles would be an excellent replacement option for a 2017 Forest River Vengeance 40D12. This kit has heavy duty shackles, bronze bushings, and greaseable wet bolts.

expert reply by: Conner L

0

Answer 1

Yes, it is possible. You will need to know the dimensions of your wet bolts, the inner and outer dimensions of the bushings, and the shackle strap dimensions, and the bolt hole diameter. Once you have this information you can find the correct part in…

view full answer...

Answer 2

From what I have found, you have 4,400 lb axles on your 2010 Keystone Cougar 26BHSWE. Your axles have a hub face measurement of 85" and a 68-1/2" spring center. Unfortunately, 4,400 lb axles are no longer being made so you will also be…

view full answer...

Answer 3

Sounds like you are just looking for a wet bolt kit for your 2018 Keystone Bullet 269RLS. For that we have the wet bolt part #126B2 for a single wet bolt and nut. Or for a kit that includes wet bolts, new bushings, heavy duty shackles, and nuts for a…

view full answer...

Answer 4

From what Camco tells me, they use around 10 unique key numbers on their #CAM44303 locks. This is a good, sturdy barrel key lock that is very tamper resistant and short of drilling out the lock is difficult to defeat.

view full answer...

Answer 5

Thank you for all of the info you listed and the pictures. Based on that the MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR is the correct fit. Your trailer does not have the Correct Track setup on it. There would be a height difference…

view full answer...

Answer 6

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Answer 7

Thanks for the pictures! If you're getting that loud of noise out of your 2019 Jayco Eagle Fifth Wheel's equalizers then it is time to replace them. Greasing them won't fix that loud clunking noise. If your axles are 35" on center…

view full answer...

Answer 8

Since we know your 2019 Keystone Outback 210 URS has 3,500 lb axles the correct Lippert Road Armor is the part #LC696740 which is rated for 3,500-8,000 lbs. Then for an upgraded Lippert Tandem Axle shackle and bolt kit you could use the #LC64FR.

view full answer...

Answer 9

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 10

Weight distribution spring bar tension can be increased by tilting the head toward the trailer so that the ends of the spring bars are closer to the ground. Once connected to the lift brackets this increased angle translates into more tension, which…

view full answer...

Answer 11

The Curt Adjustable Trailer Hitch #13703 that you referenced has a tongue weight rating of 350 lbs. If the weight of your generator plus the weight of the carrier you have weighs less than 350 lbs together then this hitch would work for you. You will…

view full answer...

Answer 12

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

view full answer...

Correct Wet Bolt Kit for 2017 Forest River Vengeance 40D12

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching