Replacement Hub-and-Rotor Assembly for 2000 640 Ranger Boat Trailer With Tandem Axles
Question:
Is this the correct replacement for a 2000 620 Ranger Trail Tandem axle.
asked by: Chuck M
Expert Reply:
In order to find if the Dexter 10" Hub-and-Rotor Assembly # K08-435-05 will fit your 2000 620 Ranger boat trailer you will need some additional information. This assembly is designed to fit a 3,500 lb axle with the standard # L68149 inner and # L44649 outer bearings. I recommend checking your axle tag/bearings to see if this will fit.
The axle tag should have the capacity. It is also likely this has a serial number which could be used to identify the axle and the bearings it uses. If you cannot find this information you can remove the hub and inspect the bearings. Part numbers are typically stamped in the side.
If the part numbers are worn off you will need to measure. You can measure the inner diameter of your bearings or the spindle where the bearings ride using a digital caliper like the # PTW80157. The # L68149 has an inner diameter of 1.378" and the # L44649 has an ID of 1.063". If you find that you have the same measurements or bearings then you can use the # K08-435-05 as a replacement.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Integrated Rotor
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Search Results: glolight
- Search Results: glolights
- Shop: GloLight Thinline LED Trailer Clearance or Side Marker Light - Submersible - Rectangle - Amber Lens
- Shop: Dust Cap Driver Tool - Medium - for 2.440" OD Grease Caps
- Shop: GloLight LED Trailer Tail Light - Stop,Turn,Tail - Submersible - 21 Diodes - Round - Red Lens
- Shop: B&W Defender Locking Gooseneck Coupler Inner Tube - Round - 2-5/16" Ball - 25,000 lbs
- Search Results: grease cap driver
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Shop: Black Bracket and Single Plug-N-Go Plug for Thin Line Trailer Clearance and Side Marker Lights
- Q&A: Replacement Bearings, Races and Oil Seals for Ranger Tandem Axle Boat Trailer with Cool Oil Hubs
- Search Results: bearing packer
- Search Results: ez loader oil seal
- Search Results: l44649
- Search Results: horse trailer door
- Shop: Gooseneck Hitch
- Q&A: What is Angle of Redline A-Frame Coupler, part # CA5400
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Shop: Suspension Enhancement
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Trailer Brake Drums For Dico 15638 With ST175/80R13 Wheels and Tires
- Q&A: Are Timken Trailer Bearings Made in USA
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Q&A: Replacement Grease Seal for a 168255TC Rubber Coated Seal
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Tire Sizing
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle