Front Hitch for Carrying Bikes on Front of 2014 Ford F350

Question

Question:

I have 2014 F350 Dually. Looking for a front hitch so I can take bicycles with us while camping. Thanks.

asked by: Terry P

0

Expert Reply:

We do indeed offer front mounted receivers for your 2014 F-350 DRW. The hitch you need will depend on whether your rig is a 2WD or 4WD.

The EcoHitch # EH59FR works with either the 4x2 or 4x4 model. The Curt # C31038 fits 4x4 models only.

Due to the lower cost, I'd go with the Curt model if you have the 4x4 model.

expert reply by: Mike L

0

Answer 1

That is a good question and the answer is no, you do not have to remove the front bumper on your 2015 Ford F-250 to install the EcoHitch front hitch that fits, which is the following part number: - EcoHitch Hidden Front Mount Trailer Hitch Receiver…

view full answer...

Answer 2

At one point the EcoHitch Hidden Front Mount Trailer Hitch Receiver #306-X7904 did only fit the gasoline models Ford F-350s, but it has been updated and is confirmed to fit the diesel models as well. Another option is the Curt Front Mount Trailer…

view full answer...

Answer 3

Yes, the EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" item #EH59FR is a confirmed fit for your 2013 Ford F-350 Super Duty. I've attached a photo from EcoHitch showing what it looks like once it's installed.

view full answer...

Answer 4

The best route would be to use a snow plow like the Detail K2 Elite Snowplow for 2" Hitches #K2AVAL8826ELT with the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH59FR on your 2013 Ford F-250. This way you will not need to purchase…

view full answer...

Answer 5

I reached out to EcoHitch directly and confirmed that the EcoHitch Hidden Front Mount Trailer Hitch Receiver #306-X7904 will fit your 2020 Ford F-350 Diesel. EcoHitch informed me that they updated the EcoHitch #306-X7904 to work with both the gas and…

view full answer...

Answer 6

According to Curt, their #C31078 won't fit DRW models of the 2021 F350 because all DRW models are equipped with the Diesel engine. The intercooler and associated plumbing will physically prevent the hitch from being installed. For the 2018 and…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Front Hitch for Carrying Bikes on Front of 2014 Ford F350

Products Referenced in This Question

Featured Help Information

Miscellaneous Media

Continue Researching