Can 9/16" Trailer Hub Studs be Changed to 5/8" Studs
Question:
I would like to change the 9/16” studs to 5/8” studs so I can run bigger wheels and tires. Can I order the 5/8” studs from you. They are dexter axels. Thank you
asked by: Mike
Expert Reply:
It may be possible to change your studs from 9/16" to 5/8" so long as the studs are drive-in, and the length and knurl/spline diameter needs to be the same. For example, if your studs are 2-3/4" long and have a 0.69" diameter spline you can use the Replacement Drive-In Trailer Hub Wheel Stud - 5/8"-18 x 2-3/4" Long # 7-232.
So you do need to have some very specific measurements, otherwise you will need to change your hub to get that size wheel stud. I have added a link below to our entire selection of 5/8" studs.
Product Page this Question was Asked From
Replacement Drive-In Trailer Hub Wheel Stud - 5/8"-18 x 2-3/4" Long - Quantity 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 5/8 Inch Diameter
- Drive-In Stud
- 2-3/4 Inch Long
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wheel Lug Nut - 5/8"
- Shop: Trailer Wheel Lug Nut - 5/8"(Each)
- Shop: Replacement Drive-In Trailer Hub Wheel Stud - 5/8"-18 x 2-3/4" Long - Quantity 1
- Shop: Replacement Trailer Hub Wheel Stud, Drive-In, 5/8" x 2-13/16" (Qty 4)
- Shop: Replacement Trailer Hub Wheel Stud, Drive-In, 5/8" x 3-1/8" (Qty 4)
- Video: Redline Tires and Wheels RG03-140 Review
- Search Results: trailer jack base plate
- Q&A: Matching Lug Nuts to Use with Wheel Stud # RG03-140
- Video: Redline Tires and Wheels RG03-120 Review
- Search Results: 58 wheel stud
- Shop: CE Smith Trailer Wheel Lug Nut - Zinc-Plated Steel - 1/2" - Qty 1
- Shop: Prest-O-Fit RV Outdoor Rug - 8' Long x 20' Wide - Brown
- Search Results: gooseneck coupler
- Video: Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler Review and Installation
- Q&A: Replacement Wheel Studs for AL-KO Hayes 09080587 10K Axle Hub
- Q&A: Can Hub Studs be Changed from 9/16 to 5/8 to Use 17-1/2 Inch Wheels on a Horse Trailer
- Q&A: Is It Possible To Use 17-1/2" Wheels For 5/8" Studs On Hub With 9/16" Studs?
- Q&A: What is the Difference Between a 60 Degree Cone and 90 Degree Cone for Lug Nuts
- Search Results: 25580
- Shop: Trailer Hitch
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Dexter Suspension Kit 7753400
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Search Results: 44649
- Video: B and W Hitch Ball - Trailer Hitch Ball - BWHB94005 Review
- Shop: Fifth Wheel Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Accessories and Parts
