Recommended Puck Light For A 3" Wide x 1" Deep Cutout Hole

Question

Question:

looking for similar gustafson 277-000343 but its just under 3inch wide housing and 1inch deep

asked by: Tracy N

0

Expert Reply:

The closest option we have to the # 277-000343 with a 3" W x 1" D housing dimensions would be the Glantastic LED RV Puck Light # 328-K-58L34P9 with it's 3-3/8" W x 3/4" housing dimensions. This means you would need to trim out the cutout hole an extra 3/8" for the light to properly fit.

If you don't want to cut the hole larger you could just stick with the # 277-000343 since it will fit within your cutout and still cover it since the cover has a 3-1/2" diameter.

expert reply by: Kevin C

0

Answer 1

I tried looking up info on your model light but I couldn't find anything online. The Gustafson RV Puck Light #277-000343 has an overall diameter of 3-1/2" and it is 1-1/4" tall. The base dimensions are 2-1/8" diameter x 3/4"…

view full answer...

Answer 2

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 3

The 18.5x8.5-8 is actually an old tire size that is not used much anymore. The closest metric size to your existing tire would be 215/60-8. Your wheel most likely has a 5-on 4-1/4 inch bolt pattern (see link), you will want to make sure that the bolt…

view full answer...

Answer 4

The 1-7/8 inch width is what is rounded up to 2 inches which is a standard width for winch straps. The 14 foot length is not something we carry. I recommend the Hand Winch Strap with Safety Hook, 2" Wide x 15' Long - 4,000 lbs #DL24239 or…

view full answer...

Answer 5

You're correct. The repalcement for your existing B12EA-22 brake would be #AKEBRK-7R-SA for the right side and #AKEBRK-7L-SA for the left.

view full answer...

Answer 6

I wasn't able to find any model information on your Sunlink RSBF3NN-008 and we don't carry that particular brand, but we do have a number of recessed puck lights available that may work for you. You may be able to use the Gustafson RV Puck…

view full answer...

Answer 7

Demco actually has a kit that was designed to convert an Air Force One kit to a Stay in Play DUO which is what you would need since you have hydraulic brakes with the part #SM99231. This will work with what you have now and work great. If you send me…

view full answer...

Answer 8

Hey David, we've used the LaSalle Bristol RV Roof Vent install kit part #344270KITW to install several MaxxFan RV roof vents and it's worked well so it would also work well for you. This comes with everything needed so it would be a great…

view full answer...

Answer 9

The MORryde Cushioned 5th Wheel Pin Box part #MR44VR will have dimensions almost identical to that of the pin box it replaces so there will not be any bed or cab clearance issues with the pin box swap.

view full answer...

Answer 10

In the spring mount style of puck light the closest option we have is the part #DG52445VP that you referenced but would require you to slightly open up the holes in your ceiling if what you have is 2-3/4 inches in diameter as this needs a 3 inch…

view full answer...

Answer 11

What you have appears to be a standard puck light which you could use the part #277-000343 as a replacement for if it's 3 inch in diameter like it looks like. We also have 4-1/2 inch size like part #277-000344 but it does look to me like you have…

view full answer...