Trailer Hitch Receiver Fit For 2022 Lexus NX 450h+

Question

Question:

Hi there, Im looking for a trailer hitch for a 2022 Lexus NX450h+. Would you be able to point me in the right direction? Thanks

asked by: James T

0

Expert Reply:

I did some checking and was able to verify there is a trailer hitch receiver fit for your 2022 Lexus NX 450h+ from Curt, and is the following part number:

- Curt Trailer Hitch Receiver # C33NR

I confirmed directly with the manufacturer that this will fit your '22 NX 450h+ so long as it is not an F-Sport model (there are no hitches for the F-Sport model).

expert reply by: Kyle S

0

Answer 1

The Curt hitch part #C33NR does fit your 2023 Lexus NX450H and it will affect the hands free liftgate. But what we have found is that if you kick to the sides of the hitch it will still function.

view full answer...

Answer 2

I can confirm that the Draw-Tite Trailer Hitch item #DT82QR does fit your 2022 Lexus 450h+. This hitch is custom fit and bolts directly to your Lexus with included hardware. I verified this information directly with Draw-Tite. It does not fit the…

view full answer...

Answer 3

The only trailer hitch receiver that fits your 2023 Lexus NX 450h+ (so long as it is NOT the F Sport model) is from Curt, the Curt Trailer Hitch Receiver #C33NR. This is a verified fit directly from the manufacturer, so it will 100% fit.

view full answer...

Answer 4

The only hitch available for a 2023 Lexus NX350 is the Curt Trailer Hitch item #C33NR. This hitch is custom fit and bolts to your Lexus with included hardware. This is a class III hitch with a 2" receiver. It has a 2,000 lbs towing capacity and…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Trailer Hitch Receiver Fit For 2022 Lexus NX 450h+

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching