Replacement Washer for 1,250 Pound Dutton-Lainson Trailer Jack

Question

Question:

Hi I have a Dutton lianson trailer tongue jack 1250 lbs tongue weight. The number on the jack is 203960B. I need the washer between the two gears at the top of the jack . There are the two gears that mesh the washer or bushing broke . Thanks Ken

asked by: KEN

0

Expert Reply:

What you need is the Replacement Miter Gear Kit for Dutton-Lainson Trailer Jacks - 1,250 - 2,000 lbs. (1996 and Newer) # DL22439. This comes with replacement gears as well as the washer you need to replace on your current trailer jack.

expert reply by: Robin H

0

Answer 1

I confirmed with my contact at Dutton-Lainson that Replacement Miter Gear Kit for Dutton-Lainson Trailer Jacks - 1,250 - 2,000 lbs. (1996 and Newer) #DL22439 is your correct kit for your Dutton Lainson boat jack. We were able to match this gear kit…

view full answer...

Answer 2

I attached a picture that has about every dimension you can think of for the gear kit part #DL22439.

view full answer...

Answer 3

Without the manufacturer name and model number of the jacks on your truck camper it will be difficult at best to determine the correct replacement parts for the jacks. I pulled this part from stock and attached a photo showing all of the dimensions…

view full answer...

Answer 4

There are one Fulton Jack repair kit available that could potentially work for you. You will need to get some measurements from the gears in your jack in order to know which one would work for you. I attached a picture that has all of the dimensions…

view full answer...

Answer 5

It is likely based on the capacity of the jack that you will need bevel gear kit, #F0933302S00, that you have referenced. You may be able to find more information about the jack by looking at the cap or for numbers near the bottom of the inner/outer…

view full answer...

Answer 6

The Replacement Gear Kit for etrailer and Ram Round Swivel Marine Jacks part #MJ-1000B-GR have a 1/2" inner diameter and 1-1/8" outer diameter.

view full answer...

Answer 7

Thank you for providing the photo of your Fulton jack handle as well as the clear description of the compatibility issue you've encountered with the jack repair kit you purchased, part #F0933302S00. My contact at Fulton was able to confirm that…

view full answer...

Answer 8

I spoke with my contact at Fulton about the issue you are having with your 1500 pound Magnum trailer jack. His first thought was that the tongue weight could be too high and this could make it difficult to get the wheel to rotate or pivot. It is also…

view full answer...

Answer 9

We do not offer a gear kit specifically for the Reese 74410 trailer jack but there is a good possibility that the Replacement Bevel Gear Kit for Fulton Jacks, #F0933302S00, will work for you. I have included a picture which lists the dimensions of…

view full answer...

Answer 10

I pulled the Fulton Bevel Gear Kit, #F0933302S00, from the warehouse and measured the bevel gears for you. The gears are 1-1/8 inches outer diameter x 15/32 inch thick with a 1/2 inch inner diameter. The groove pin is 3/16 of an inch in diameter x 1…

view full answer...

Answer 11

The Replacement Bevel Gear Kit #F0933306S00 is for applications. The #F0933302S00 will fit the following Fulton jack models: TJ503/C, TJU503, PMJ53, TJ507/C, PMJ75, CS750, GR700/TJ712, XP10/6/W/WC and XP100. Since your jack is as old as it is and you…

view full answer...

Answer 12

Based on the 1-1/8" diameter x 1/2" thick measurements you provided of your current gears, the Replacement Fulton Gear Kit #F0933302S00 would be the correct gear kit for your older Fulton jack as it includes two bevel gears that are…

view full answer...

Replacement Washer for 1,250 Pound Dutton-Lainson Trailer Jack

Product Page this Question was Asked From

Continue Researching