Will The BullRing Offset Retractable Tie-Down Anchors, # BU78FR, Fit A 2022 Ford F-350 Super Duty

Question

Question:

Will these fit a 2022 Ford F350 CC SB? Thx!

asked by: Dave E

0

Expert Reply:

Yes, the BullRing Offset Retractable Tie-Down Anchors for Truck Bed Stake Pockets - Flush - 1,000 lbs - Qty 6, part # BU78FR, will fit your 2022 Ford F-350 Super Duty Crew Cab. They are offset, so if you do not need offset tie-down anchors for stake pockets you will need to go with part # BU58FR instead. Each of these options comes with front, middle, and rear tie-down anchors.

I will include a pictures of a regular version and the offset version below.

expert reply by: Mark Smith

0

BullRing Standard Tie-Down.JPG
(click to enlarge)

BullRing Offset Tie-Down.JPG
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

An offset stake pocket on your 2021 Ford F-150 has a stake pocket that is biased slightly forward or rearward, not centered. On your vehicle, only the front and middle stake pockets would be offset on your 2021 Ford F-150. If your tie-down anchors…

view full answer...

Answer 3

The correct fitting BullRing tie-downs for your 2021 GMC Sierra 3500 are new, which is why they've been hard to find until now. You'll need the BullRing Stake Pocket D-Rings #BU94VR. These tie-downs are only compatible with the stake pockets…

view full answer...

Answer 4

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Answer 5

I do have full replacement towing mirrors for your 2004 GMC Sierra 2500HD but you are going to lose the power telescoping feature because none of the replacement towing mirrors we offer for your vehicle allow you to retain this feature. If you are…

view full answer...

Answer 6

The weight of the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 6" Drop/Rise - 21K #325-GH-1324 is 115 lbs.

view full answer...

Answer 7

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount part #C83WR won't work with a weight distribution system due to the design of the adjustable shank but we do have a very similar option that will, the Gen-Y Torsion Weight Distribution…

view full answer...

Answer 8

If you were to use the 4 inch offset ball #BWGNXA4085 the pin weight on the ball will not be changed. What will change is where the weight is carried on the truck. Using the offset ball will put more weight 4 inches back from the center of the…

view full answer...