How Does the Thule Basin Wedge Rooftop Tent and Cargo Box Convert From Tent to Cargo Box

Question

Question:

The Basin Wedge tent states it can be used as a cargo box. It seems pretty slender, how would that work?

asked by: Rick N

0

Expert Reply:

The Thule Basin Wedge Rooftop Tent and Cargo Box # TH92VY uses a canopy zipper system to convert from a rooftop tent to a cargo box. The tent would be removed using the zipper system and stored out of the box along with the included foam mattress. This would free up the space inside of the box to carry cargo.

The Thule Basin Wedge Rooftop Tent and Cargo Box # TH92VY would then have inside storage dimensions of 84" long x 55" wide x 12-3/4" tall.

expert reply by: Scott S

0

Answer 1

The Thule Basin Rooftop Tent and Cargo Box #TH32VY that you referenced only has an entry point on the side which is why the ladder only attaches to the side of the tent. Only the wedge version part #TH92VY can have the ladder attach to the rear of…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 6

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

The best trailer hitch receiver for carrying bikes that fits your 2021 Toyota RAV4 Limited Hybrid is the EcoHitch Hidden Trailer Hitch Receiver #EH97FR. The reason for that is because it has the best ground and bumper clearance for a bike rack…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

We haven't had the opportunity to install the #EH97FR EcoHitch as of yet, but hen we installed the Curt #C13416 on a 2021 RAV4, we found that the inside top edge of the receiver tube sat about 12 inches above the ground, which would place the…

view full answer...

Answer 11

For mounting a basket on your crossbars you will need to use the Yakima SkinnyWarrior #Y07014 as the Yakima GearWarrior Cargo Carrier #Y37VR can only be mounted to the Yakima EXO SwingBase #Y34VR or TopShelf #Y94VR. The Yakima SkinnyWarrior #Y07014…

view full answer...

Answer 12

You actually won't need to trim any rear fascia when installing any of our trailer hitches on your 2020 Toyota RAV4. Out of our selection I recommend going with the Class III Curt Trailer Hitch #C13416 because it has a 2" receiver (so it is…

view full answer...