Recommended Rack to Carry 2 Fishing Kayaks Using the Malone MegaWing Carriers in a Utility Trailer

Question

Question:

Hello I have two fishing kayaks that I would like to transport with my utility trailer that is approx 6 ft wide by 10 ft long. I believe I would like to use your kayak holders that would attach to crossbars. I want to attach the crossbars to the trailer side rails or maybe on the floor of the trailer. The kayaks range from 55 to 90 lbs each. What products would you direct me to consider? Thanks

asked by: Daryn S

0

Expert Reply:

We have a great option for you to use the Malone MegaWing Fishing Kayak Carrier with Tie-Downs # MPG207 to carry your fishing kayaks on your utility trailer.

I recommend the Malone TopTier Load Bar Kit for Utility Trailers # MPG493. This load bar kit is specifically designed for utility trailers and will allow you to use the Malone MegaWing Fishing Kayak Carrier with Tie-Downs # MPG207. This load bar kit can hold up to 250 lbs. which is plenty for your 2 fishing kayaks.

expert reply by: Scott S

0

Answer 1

Changing a trailer's tire size does not necessarily equal an upgrade. The most useful way to add safety margin to a trailer is to change the Load Range rating of the existing tire size. I will explain why. Heat is a trailer tire's worst…

view full answer...

Answer 2

I did some research on your 2021 Hobie Outback, and the hull measures 34 inches wide. For a width of 34 inches, the Malone MegaWing Fishing Kayak Carrier with Tie-Downs #MPG207 will be able to carry it on a crossbar system. If you wish for me to…

view full answer...

Answer 3

The Malone MegaSport Kayak Trailer #MPG535 has 86" wide crossbars so you will be able to lay both kayaks side-by-side and they will stick out 1" on either side. The best kayak carrier for your application is the Malone MegaWing Fishing…

view full answer...

Answer 4

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 5

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 9

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 10

The 12 inch tires that we carry are rated for 65 miles per hour. Any faster than that for extended periods and the excessive heat build up will cause tire failure. To get a tire with a higher speed rating you would have to go up in size. That also…

view full answer...

Answer 11

Karrier and Loadstar are two different brand names used by Kenda. There's no difference in quality or function between the two brand names. For a ST175/80-13 Radial trailer tire in load range D, I'd recommend part #AM10210 if you're…

view full answer...