Castle Nut Torque Spec for 3,500 Pound Axle
Question:
What should the wheel seal not be torque to on a 3500 pound axle
asked by: Ashley M
Expert Reply:
It sounds like you're asking about the torque spec for the castle nut on your 3,500 lb axle. There is no specific torque rating when installing the castle nut on any axle. You want to run the nut down until there is no side to side play in the hub, and then back it off to the next notch in the castle nut so the retainer can secure the nut. Over-tightening the castle nut can damage the bearings, races and spindle.
I have attached a video showing this process. If you jump to the 4:45 minute mark, you can see the procedure outlined above.
Product Page this Question was Asked From
U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- 1/2 Inch Diameter
- 5-1/2 Inch Long
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Cleaning and Replacing Hubs and Bearings
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: bearing buddy
- Shop: Dexter Multi-Purpose Lithium Grease - 14 oz. Cartridge
- Shop: SideBar Rails for Yakima OverHaul HD and Outpost HD Truck Bed Racks - Short Bed - 100 lbs - Qty 2
- Shop: Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 5 on 4-1/2 - LR D
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: RV Interior Lighting
- Search Results: wheel cover
- Article: How to Measure a Trailer Axle
- Article: Double-Eye Trailer Suspension System Review
- Search Results: trailer springs
- Q&A: After How Many Years Should Trailer Tires Be Replaced
- Q&A: Replacement Hub for a Lippert LCI 126003 Hub
- Video: Review of SAM Snow Plow Replacement Parts - Cotter Pin for Western Snowplow - 3371302250
- Q&A: How to Set the Preload for the SumoSprings Trailer Helper Springs
- Q&A: What is the Torque Spec of the Spindle Nut on a Dexter E-Z Lube Axle
- Shop: Wheel Cover
- Search Results: bearing buddy 1980
- Search Results: bearing buddy 2080t
- Search Results: wheel spacer
- Q&A: Do Trailer Tire and Wheel Combos Come Already Mounted and Balanced
- Search Results: cotter pin
- Q&A: Replacement Leaf Spring Recommendation for Trailer with 25-1/8 inch Springs and 2k Capacity
- Shop: Trailer Wiring
- Shop: Tire Chains
- Article: Testing Trailer Brake Magnets for Proper Function
on Trailer Suspension Parts
