Availability of Axle Hub Grease Dust Cover That Fits Hub Bore of 1.810" Diameter

Question

Question:

ID OF THE TUBE IS 1.810 DO YOU HAVE A DUST COVER FOR THAT

asked by: Robert M

0

Expert Reply:

The Bearing Buddy Bearing Protectors # BB1810 is currently the only grease cap we have that fits a 1.810" hub bore opening.

expert reply by: Bud M

0

Answer 1

You would need to measure the inside diameter of the hub opening to determine which cap size is needed. You would want to choose a cap whose outside diameter matches the inside diameter of the hub. Some of the most common sizes are 1.980 inch,…

view full answer...

Answer 2

The closest Bearing Buddy we offer to the 2-inches you said you measured on your hub is part #BB2047. These protectors are designed for 2.047 inch inside hub diameters. There are two Bearing Buddy Protectors in the package. The best way to make…

view full answer...

Answer 3

The grease cap you'll need for your 1.77 inch hub bore is from Fulton, part #F001503. The outside diameter at the base is 1.78 inches which is perfect, as it's meant to fit tightly. I've linked you to a product description…

view full answer...

Answer 4

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side.…

view full answer...

Answer 5

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack…

view full answer...

Answer 6

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 7

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area…

view full answer...

Answer 8

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex…

view full answer...

Answer 9

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 10

Yes, the Solera Slide Topper part #LCV000168106 is the correct fit for your flange width of 90-1/2 inches. This specific model has a box width range of 86 to 91-3/4 inches which is perfect for your width listed.

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…

view full answer...

Availability of Axle Hub Grease Dust Cover That Fits Hub Bore of 1.810" Diameter

Product Page this Question was Asked From

Continue Researching