Availability of MaxxAir Circuit Board 10C04751KS

Question

Question:

Do you happen to have a maxxair circuit board? Part #10C04751KS

asked by: Dan J

0

Expert Reply:

Yes we do! The 10C04751KS circuit board is the same as our # MA10A04751KS. Sometimes retailers use slightly different part number codes from the manufacturer. I also went ahead and attached a helpful demo video for you to check out.

expert reply by: Bob C

0

Answer 1

The correct replacement for your MaxxAir Circuit Board 10-04751ks is the following part: - Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS As for the sensor wires, so long other wires are not damaged, I…

view full answer...

Answer 2

Thank you for including the model number of your fan, 04751KS, which was exactly what was needed to find your replacement circuit board. The correct part for your MaxxAir MaxxFan Plus Roof Vent 4751KS is: - Replacement Printed Circuit Board for…

view full answer...

Answer 3

To connect the Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent #MA59FR you will need - if you don't have it - the Replacement Control Cable for MaxxAir MaxxFan Plus Roof Vent Wall Control Panel #MA69FR. You'll need to route that…

view full answer...

Answer 4

Yes the operator replacement part #MA10-20281K-1AF that you referenced will work as a replacement for your Maxxfan #4951ks.

view full answer...

Answer 5

You can use the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS to replace your damaged 10A04751ksz MaxxAir circuit board. This is a direct replacement.

view full answer...

Answer 6

I contacted MaxxFan and according to them you have a bad circuit board. Circuit boards are model specific so you will need to purchase the correct board for your model. This means you will have to look at your fan to find the model number and…

view full answer...

Answer 7

The correct replacement lift motor for a Maxxair Vent Fan 4751KS is the Replacement Lift Motor for Maxx Fan Plus Roof Vent part #MA10-20270.

view full answer...

Answer 8

The correct circuit board for your MaxxAir MaxxFan 4951KS fan is the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. It also works with The MaxxAir MaxxFan 4751KS and 4761KS models as well.

view full answer...

Answer 9

Yes you are correct the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is the right replacement and measures 18 1/8" long and 16 1/2" wide, which is the same measurements as your current MaxxFan Plus Roof Vent w/…

view full answer...

Answer 10

We do have the correct replacement motor for your 2019 Fleetwood Bounder 36f, but the Replacement Motor for Kwikee 25 Series Electric RV Steps #LC369506 is not it. From you picture I can identify that you have the 676062 motor. We do carry the 676062…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Availability of MaxxAir Circuit Board 10C04751KS

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching