Recommended LED Trailer Amber Side Marker Light For A 2018 Jayco Greyhawk Prestige Motorhome

Question

Question:

Do you have these in amber lens colors.

asked by: Luis

0

Expert Reply:

The LED Trailer Mini Clearance and Side Marker Light with Grommet - Submersible - 1 Diode - Amber Lens # MCL10AKB is the correct part you would need.

This LED trailer light functions as both a clearance and side marker light when properly mounted. It is made out of a durable polycarbonate base and lens. It is a recessed mount and the grommet is included.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

There sure is! The Backing Plate #HP92FR you were looking at is designed for the fenders that measure 72" long x 20-1/2" tall so they will work perfectly with the Tandem Axle Trailer Fenders #HP84VR you were looking at. I included videos of…

view full answer...

Answer 2

There is indeed a rubber mounting grommet available for use with the Optronics Round Trailer Clearance Side Marker Light #MC57RB that you referenced. The part you will need for use with this light is part #A55GB. This grommet provides a degree of…

view full answer...

Answer 3

The LED Trailer Mini Clearance and Side Marker Light with Grommet #MCL10RKB is designed to install into a 3/4" hole. A Replacement Flush Mount Rubber Grommet #A11GB is available and I recommend getting as few of these as the original ones are…

view full answer...

Answer 4

You may not even need load resistors to switch to LED lights. The best thing to do is to try the lights without load resistors first. No need to purchase something you may not need until you know need it. Load resistors such as #DI34ZR dissipate heat…

view full answer...

Answer 5

Wire colors are rarely the same from trailer to trailer or vehicle to vehicle so you have to wire things up by function. I have included a picture showing the functions of Hopkins 7-Way #H20046 for you. On the trailer side there are a couple of ways…

view full answer...

Answer 6

There's not a universal way that trailers are wired. I have attached a diagram showing the three typical ways and this should also help you to connect to the 7-way harness you purchased once you identify your wires. Yours is obviously different,…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...