Will Roadmaster Direct Connect Base Plate Kit Attach to Roadmaster Falcon Tow Bar

Question

Question:

Will this work with a falcon 5250 tow bar going on a 22 bronco standard bumper

asked by: Randy W

0

Expert Reply:

The Roadmaster base plate kit part # RM79RR that fits your 2022 Ford Bronco is compatible with the Roadmaster Falcon tow bar part # RM-520. These two are directly compatible and no other adapters or hardware would be needed to connect them.

expert reply by: Jameson C

0

Answer 1

We do indeed have base plates that fit your 2022 Ford Bronco Wildtrak that will allow you to use the Roadmaster Falcon 2 Tow Bar #RM-520. The correct fit will depend on if you have the standard factory bumper or have the optional Ford Performance…

view full answer...

Answer 2

For your 2022 Ford Bronco with the Ford modular bumper you will need Roadmaster Direct-Connect Base Plate Kit #RM92ZR. This will allow you to direct connect your Roadmaster Falcon All Terrain, Non-Binding Tow Bar #RM-522 rather than having to use a…

view full answer...

Answer 3

Yes, it is possible to use a tow bar with your 2021 Ford Bronco Sport. You will just need to use a base plate kit. The Roadmaster Direct-Connect Base Plate Kit #RM79RR is confirmed to fit the 2021 Ford Bronco with a standard bumper. This would allow…

view full answer...

Answer 4

When installing a flat towing package on your 2022 Ford Broncos I recommend The following items below: Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM92ZR Roadmaster Falcon 2 Tow Bar - Motorhome Mount - 2 inch Hitch - 6,000 lbs #RM-520…

view full answer...

Answer 5

I have everything you need to setup and flat tow a 2021 Ford Bronco with Heavy Duty Modular Bumper. The first thing you'll need is a base plate kit, the Roadmaster Direct-Connect Base Plate Kit part #RM92ZR is designed for this exact bumper so…

view full answer...

Answer 6

While we don't have a simple plug-and-play tow bar wiring kit for your 2021 Ford Bronco we do have the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit #RM-15267. This diode kit allows you to use your Bronco's tail lights and wiring…

view full answer...

Answer 7

I checked with my contact at Roadmaster. The Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM92ZR is a confirmed fit for the 2022 Ford Bronco models equipped with, Ford Performance Heavy Duty Modular Bumper only with no winch. Other…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Will Roadmaster Direct Connect Base Plate Kit Attach to Roadmaster Falcon Tow Bar

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching