What is the Bolt Size of the Bolts Included in the Replacement Hardware Bag for Yakima Saddles

Question

Question:

Are these 6mm bolts ot the larger 8mm? I need the 6mm.

asked by: Cameron R

0

Expert Reply:

I contacted the manufacturer and the bolt in the Replacement Hardware Bag for Yakima Mako Saddles, LandShark Saddles, HullRaiser or Kayak Stacker # Y8840018 are 2.5" long, 5/16-18 bolts.

If you can provide me with what carrier you are needing replacement bolts for, I would be happy to help you find the correct replacement bolts.

expert reply by: Scott S

0

Answer 1

I reached out to Yakima who said you can use the HandRoll Kayak Roof Rack #Y04082-2 with their LongArm Truck Bed Load Extender #Y01149. This will make loading your kayak much easier as it will roll on the extender.

view full answer...

Answer 2

The Yakima Kayak Carrier with Tie-Downs - Saddle Style with Rollers - Clamp On, part #Y04083-04082, will fit the 1-1/2" X 1-1/2" crossbars on the Adarac Aluminum Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs, part #A54PM. I have…

view full answer...

Answer 3

The Yakima Kayak Carrier with Tie-Downs - Saddle Style with Rollers part #Y04083-04082 is designed to fit a wide variety of roof rack systems including the round bars similar to Yakima Round 48" CrossBars for Yakima Roof Rack Systems part…

view full answer...

Answer 4

To carry kayaks with the Yakima LongArm Truck Bed Load Extender #Y01149 you need the Crossbar Pad for Yakima LongArm Load Extender #Y07417 because none of the J-Style cradles have long enough bolts for the 2" diameter of the LongArm. If you…

view full answer...

Answer 5

While there are not instructions available for removing the Yakima BaseLine Towers Y00146 from your 2016 Honda Civic I would be happy to walk you through the removal process. This will require the tightening tool that was included with your BaseLine…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 12

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...