Does EcoHitch Front Hitch Fit 2021 Pleasure-Way Ascent Motorhome on Mercedes Sprinter 2500 Chassis

Question

Question:

I need to be assured this will fit a Pleasure-way Ascent TS 2021 on a mercedes sprinter 2500 chasis. And if so, what issues are there on install, eg trimming, bumper, etc.Thanks in advance

asked by: Ed H

1

Helpful Expert Reply:

I can assure you, as I did verify the fitment directly with the manufacturer, TorkLift. So the EcoHitch front hitch will definitely fit your 2021 Pleasure-Way Ascent motorhome on a Mercedes Sprinter 2500 chassis, with the correct part number being the following:

- EcoHitch Hidden Front Mount Trailer Hitch Receiver # 306-X7352

As far as trimming, you will just need to trim a 5" x 3" rectangle under the front bumper fascia to allow the hitch receiver to protrude.

expert reply by: Kyle S

1

Answer 1

I checked with both Draw-Tite and Curt and sadly the only option for putting a front mounted hitch on your 2019 Mercedes 2500 Sprinter is to use the EcoHitch item #306-X7352. Front mounted hitches for the Sprinter vans are extremely limited and I…

view full answer...

Answer 2

EcoHitch does not allow their instruction manuals to be linked, so I cut out and added the most relevant portions of the installation of the EcoHitch Hidden Front Mount Trailer Hitch Receiver #306-X7352. This hitch, which is a confirmed fit for your…

view full answer...

Answer 3

I reached out to my contact at EcoHitch and the EcoHitch Hidden Front Mount Trailer Hitch Receiver #306-X7352 you were looking at is indeed confirmed to fit your 2020 Mercedes-Benz Sprinter 2500, so you will have no issues when it comes to fitment.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

view full answer...

Answer 9

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Does EcoHitch Front Hitch Fit 2021 Pleasure-Way Ascent Motorhome on Mercedes Sprinter 2500 Chassis

Product Page this Question was Asked From

Continue Researching