Is Install of Curt Trailer Wiring for 2022 Honda CR-V Same on Hybrid Models

Question

Question:

Is the installation in a 2022 Hybrid touring model the same as shown in the video?

asked by: Douglas G

0

Expert Reply:

Yes, the install of the Curt trailer wiring kit part # C56370 is the same on the hybrid and non-hybrid models of the 2022 Honda CR-V. The process shown in the attached install video would be exactly the same.

expert reply by: Jameson C

0

Answer 1

We do have a couple options for your 2022 Honda CR-V, however I recommend the EcoHitch Hidden Trailer Hitch Receiver #306-X7345. This hitch is capable of handling up to 3,500lbs trailer weight, and 525lbs of tongue weight. For wiring, I recommend the…

view full answer...

Answer 2

The hidden design on the EcoHitch Trailer Hitch Receiver #306-X7345 for your 2018 Honda CR-V is definitely a really nice feature that helps to maintain a sleek factory appearance on the vehicle. When installing the hitch you will just need to cut a…

view full answer...

Answer 3

The trim area is skewed to the drivers side. In the 2020 model year video, at the 4:15 mark you can see that it is skewed to the drivers side, or to say left of the tow hook. What our own installers do is to put one bolt in each side (closest to the…

view full answer...

Answer 4

The trailer wiring harness for your 2017 Honda CR-V part #118741 will not require you to run wires up to the vehicle battery. The power source the harness needs is present at the rear of the vehicle already as it's basically pre-wired from the…

view full answer...

Answer 5

The 6-pin connector is definitely in your 2018 Honda CR-V, though sometimes, finding them can be a real pain. The best advice I can give you is just to continue looking, though it's difficult to orient exactly where you should keep looking based…

view full answer...

Answer 6

Yes, the trailer hitch receivers for the 2023 Honda CR-V fit the hybrid model as well. There are no differences for the hybrid hitch since all of the available options fit all models. If I were to recommend one it would be the etrailer Trailer Hitch…

view full answer...

Answer 7

You are 100% correct; I checked with the manufacturer, Draw-Tite, for you and verified with them that their hitch does fit the 2022 Honda CR-V (except for the Hybrid models), with the correct part number being the following: - Draw-Tite Max-Frame…

view full answer...

Answer 8

Fascia trimming is required to install the etrailer Trailer Hitch Receiver #e98848 on your 2024 Honda CR-V, but this is the case for all of the hitches that fit your vehicle. According to the instructions you'll be cutting out a notch that is…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

It is going well and I'd be happy to help you! For a 2024 Honda CR-V Hybrid Sport, I recommend the etrailer Hitch item #e98848 you were looking at. We have confirmed through our vendor and customer reviews that this hitch will fit the hybrid…

view full answer...