Best 2-1/2 Inch Gen-Y Shank for a Weight Distribution System
Question:
Hi, I’ll be hauling numerous different travel trailers weighing between 5000-9000 pounds. Most trailers would max out around 8000 pounds. I also have a 2.5 inch receiver. Should I purchase the hitch with 1100 TW or the 1700 TW hitch? Thanks,
asked by: Adam H
Helpful Expert Reply:
If you're hauling different trailers with different weights you aren't going to want to be worried about tongue weight and being over capacity. I recommend using the Gen-Y Torsion Weight Distribution Shank - 2-1/2" Hitches - 6-1/2" Drop/Rise - 1,700 lbs TW item # 325-GH-1102 and never having to worry about it.
Also this is the smallest Gen-Y shank for a 2-1/2 receiver. The next size up Item # 325-GH-1302 which has a 2,400 lbs tongue weight capacity.
I saw you were looking at the Reese Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 17K GTW, 1,700 lbs TW item # RP66075. This system is compatible with the GEn-Y shank and would give you plenty of capacity for your varying range of weights but not put you too over rated that you would be uncomfortable.
You will also need a hitch ball, depending on the size of your trailer's coupler, either the 2" Hitch Ball # A-90 or 2-5/16" Hitch Ball # 19286.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
Gen-Y Torsion Weight Distribution Shank - 2-1/2" Hitches - 6-1/2" Drop/Rise - 1,700 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Round - 6 Inch Drop
- Square - 6 Inch Drop
- Trunnion - 6 Inch Drop
- Round - 6 Inch Rise
- Square - 6 Inch Rise
- Trunnion - 6 Inch Rise
- Gen-Y Hitch
more information >
Gen-Y Torsion Weight Distribution Shank - 2-1/2" Hitches - 7" Drop/Rise - 2,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Round - 7 Inch Drop
- Round - 7 Inch Rise
- Gen-Y Hitch
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 17K GTW, 1,700 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1200 lbs
- 1300 lbs
- 1400 lbs
- 1500 lbs
- 1600 lbs
- Reese
more information >
Product Page this Question was Asked From
Gen-Y Torsion Weight Distribution Shank - 2" Hitches - 6-1/2" Drop/Rise - 1,100 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 6 Inch Drop
- Gen-Y Hitch
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Gen-Y Torsion Weight Distribution Shank - 2-1/2" Hitches - 6-1/2" Drop/Rise - 1,700 lbs TW
- Shop: Curt Weight Distribution Shank for 2-1/2" Hitches - 6-3/4" Rise - 3-1/4" Drop
- Video: Gen-Y Torsion Weight Distribution Shank Review
- Shop: Trailer Hitch
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop
- Shop: Reese Titan Weight Distribution w/out Shank - Trunnion Bar - 17,000 lbs GTW, 1,700 lbs TW
- Search Results: 2 516 ball
- Shop: B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package - Dual Jaw - 25,000 lbs
- Search Results: gen y
- Shop: Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 17K GTW, 1,700 lbs TW
- Shop: Replacement Head for Fastway e2 Weight Distribution Systems - Trunnion Bar
- Search Results: hitch bar
- Search Results: reese replacement parts
- Search Results: 2 1 2 inch weight distribution shank
- Q&A: Weight Distribution Shank that Fits 2.5 inch Hitch and Reese Strait Line RP66074
- Q&A: Distance Between Hitch Pin Hole and Mounting Holes on Gen-Y WD Shank # 325-GH-1102
- Q&A: Replacement Heavier Rated Spring Bars For Reese Weight Distribution Head RP58167
- Q&A: Will the Reese Replacement Head and Shank Work with Reese Trunnion Style 1,700 lb Spring Bars
- Q&A: Can 1,700 Pound Trunnion Spring Bars Replace 800 Pound Spring Bars for Trailer Weight Distribution
- Q&A: How to Upgrade the Reese 12K Strait-Line to Reese 17K Strait-Line Weight Distribution System
- Q&A: Are 1,700 lb Spring Bars Right for Camper Trailer With 1,400 lb Dry Tongue Weight
- Search Results: 2.5" weight distribution shanks
- Article: Nickel vs Stainless Steel
- Video: Curt Chrome 2-5/16 Inch Hitch Ball Review
- Video: Curt Hitch Ball - Trailer Hitch Ball - C40008 Review
- Search Results: weight distribution shank
- Video: Review of InfiniteRule Hitch Locks - Standard Pin Lock - 34061072-D
- Video: InfiniteRule Stainless Steel Hitch Lock Review
- Video: Review of Gen-Y Hitch Adjustable Torsion Weight Distribution Shank - 325-GH-1102
- Article: 5 Things to Know About Weight Distribution Hitches