Valve Stem Extensions that Can be Used no 2019 Ram 3500

Question

Question:

Id like to try and identify valve extensions for my rear dually inner wheels. Ram 3500, 2019 dually. Id purchased some in the past and they didnt work out. Bad fit. Also, will they require rebalancing the wheels?

asked by: Donald H

0

Expert Reply:

Hub mounted valve stem extensions like the Wheel Masters # WM8001 that would work on your 2019 Ram 3500 do not require rebalancing since the valve stem attaches to the hub and not the outer portion.

expert reply by: Jameson C

0

Answer 1

According to the folks at Wheel Masters, the #WM8001 4-Hose Inflation Kit mounts to the hub, so they won't affect the wheel balance. The Inflation Kit is fully compatible with stock TPMS installed inside the tire.

view full answer...

Answer 2

We have valve stem extension kits like the part #WM8001-135 which were designed for use with dually wheels like what you have on your 2016 Ford F-350.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

No, it does not but I have one that does. It is the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box item #GY86GR. This pin box is custom designed for the Lippert Rhino bolt pattern. It has an identical 21,000 lbs towing capacity and a 3,500 lbs tongue…

view full answer...

Answer 6

For your 2014 Ford F-250/350 Super Duty you will want to use Wheel Masters 4-Hose Inflation Kit part #WM8001. The bend on the Wheel Masters 4-Hose Inflation Kit part #WM8001-135 causes the hoses to be in contact with your rim as soon as it comes off…

view full answer...

Answer 7

You were on the right track- the Wheel Masters 2 Hose Inflation Kit #WM8009 are designed for 16" to 19-1/2" wheels like the ones on your Winnebago Access and will work with TPMS systems. The 7-1/2" hose length is going to supply you…

view full answer...

Answer 8

The Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F95FV are known to fit the 2024 Ford F-350 Dually. You will need to do some slight measuring in order to confirm fitment for your specific vehicle. Just measure from the top of the…

view full answer...

Answer 9

To connect a Curt Tow Bar #C26FR to your Blue Ox Base Plates #BX1143 all you need is an adapter #BX8833. The non-binding feature makes it easier to unhook to tow bar when you're on an uneven surface. Not being level can cause the bars to bind up…

view full answer...

Answer 10

We have valve extenders for your dual wheel tires. I recommend the Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Wheel Cover Mount #WM8208. The length of the hoses with straight valve extenders is 13 inches. I've attached…

view full answer...

Answer 11

Yes. You could use the Progressive Dynamics #PD52 to replace your Furrion #F50ATS; they're both rated for 50amps so they are compatible. The Furrion does provide a bit of extra protection against power surges though with it's 125/250v supply,…

view full answer...

Answer 12

On the top panel of the Furrion Transfer Switch #F50ATS is a diagram that shows how it will wire to your Weekend Warrior. I also attached a second picture that shows what's underneath the lid.

view full answer...