Can I Use the Progressive Dynamics PD52 to Replace a Furrion F50ATS

Question

Question:

I currently have the Furrion F50ATS transfer switch. It went bad. I need another one asap. Can I use the PD 52 transfer switch instead 120/240 50 amp?

asked by: Wayne B

0

Expert Reply:

Yes. You could use the Progressive Dynamics # PD52 to replace your Furrion # F50ATS; they're both rated for 50amps so they are compatible. The Furrion does provide a bit of extra protection against power surges though with it's 125/250v supply, so I do prefer that choice when possible.

expert reply by: Erik B

0

Answer 1

I reached out to Furrion directly they mentioned that the Furrion Automatic Transfer Switch #F50ATS will automatically switch to the lead it is connected to when shore power is dropped, but you will need to manually turn the generator off or…

view full answer...

Answer 2

If I understand your statement correctly, you have the Furrion Automatic Transfer Switch, #F50ATS installed but are not getting power to the RV. If you have not yet attempted to isolate/by pass the transfer switch to ensure the issue is within the…

view full answer...

Answer 3

On the top panel of the Furrion Transfer Switch #F50ATS is a diagram that shows how it will wire to your Weekend Warrior. I also attached a second picture that shows what's underneath the lid.

view full answer...

Answer 4

I have a solution for you. As you know the unit you are looking for is no longer available and we do not have replacement parts either. However, I do have the replacement for that unit which is the following part: **Progressive Dynamics Transfer…

view full answer...

Answer 5

Yes the Furrion Automatic Transfer Switch part #F50ATS would automatically switch between your power sources so that you would not have to worry about having two AC power sources running to your trailer's power setup.

view full answer...

Answer 6

With a transfer switch like the Go Power Automatic Transfer Switch #342GPTS you would have to use a second Transfer Switch #PD5110010Q to connect 2 of the three sources. Your shore power cord could also be used with a separate plug in for a…

view full answer...

Answer 7

Yes, you can use the Progressive Dynamics Transfer Switch with Quick Flip Connectors #PD5110010Q to connect two power sources (shore power and generator/inverter) but only one can be used at a time. It will automatically switch your AC input from…

view full answer...

Answer 8

The Go Power Automatic Transfer Switch #34270278 that you are interested in was designed to automatically switch power sources between an inverter or an AC power source. You'd want to run the inverter you have now to this as well as the power…

view full answer...

Answer 9

You do not need to turn the inverter off when using the Furrion Automatic Transfer Switch - 50 Amp - 125/250V #F50ATS.

view full answer...

Answer 10

The Furrion Automatic Transfer Switch - 50 Amp - 125/250V #F50ATS utilizes the same power as your house, however you would want to check with a licensed electrician to make sure it meets the housing code criteria for your area. It is UL 94 and UL…

view full answer...

Answer 11

Yes, the Furrion Automatic Transfer Switch - 50 Amp - 125/250V #F50ATS is a compatible replacement for your Intellitec 50 amp transfer switch. This transfer switch automatically reroutes your RV's AC input from shore power to generator power when…

view full answer...

Answer 12

It is possible to use a 50 Amp transfer switch with a 30 amp setup since you plan on upgrading in the future however, the Furrion Transfer 50 Amp Switch is made for 50 Amp setups. I recommend to use Progressive Dynamics 50 Amp Transfer Switch part…

view full answer...

Can I Use the Progressive Dynamics PD52 to Replace a Furrion F50ATS

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching