Wiring Diagram for Installing the Replacement Single Zone Thermostat for Dometic RV Air Conditioners

Question

Question:

which terminal do the three wires from the wall, a red, white and blue, do they connect to?

asked by: Robert

0

Expert Reply:

I contacted the manufacturer regarding the installation of the Replacement Single Zone Thermostat for Dometic RV Air Conditioners # DMC79FR. They were able to provide me with a wiring diagram which I have included here for you.

expert reply by: Scott S

0

Single Zone Thermostat for Dometic RV Air Conditioners Wiring Diagram 1
(click to enlarge)

Single Zone Thermostat for Dometic RV Air Conditioners Wiring Diagram 2
(click to enlarge)

Answer 1

The Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR is a single zone 3 wire thermostat like the one you are describing. I have attached the wiring diagram for this thermostat and the control box below for your reference.

view full answer...

Answer 2

Realistically it is best to stick with a Dometic replacement thermostat for your Dometic setup. The #DMC79FR is the correct replacement for your 3316410.012. It may be possible to use a universal thermostat like the #CAM09221 you looked at but this…

view full answer...

Answer 3

From left to right the 3 wires on the Dometic CT Thermostat like the #DMC79FR are 12V-, Comms, and 12V+. I have attached a wiring diagram below for your reference.

view full answer...

Answer 4

The only digital thermostat we offer for Dometic RV Air Conditioners is the Replacement Single Zone Thermostat for Dometic RV Air Conditioners part #DMC79FR. If you feel yours is defective or not working properly then you can replace this using the…

view full answer...

Answer 5

I contacted the manufacturer about what thermostat would be the correct replacement for your Dometic 3316410.012 Thermostat. They informed me that the Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR is the correct…

view full answer...

Answer 6

The shipping weight for the Brophy aluminum scissor steps #AS04 is 20.72 pounds. The step size is 18 inches x 6 inches deep and vertical height measures between 31 and 39 inches high. These steps have a weight capacity of 250 pounds. The weight…

view full answer...

Answer 7

The Brophy Camper Scissor Steps - 4 Steps in aluminum, #AS04 has a shipping weight of 21 lbs. The Brophy Camper Scissor Steps - 4 Steps - Steel, #SS04 is 34 lbs.

view full answer...

Answer 8

The Brophy Scissors Steps part #SS04 are only to be used while vehicle is stationary. They are not made to be permanently mounted to the camper. It needs to be installed using the mounting bracket that attaches to the camper. With the mounting…

view full answer...

Answer 9

We have heard of this issue before on the Lippert Ground Control systems #LC358590. Here is the recommended procedure for clearing the error code: Extend all jacks at least 6 inches. Then press and hold the RETRACT button until the jacks begin…

view full answer...

Answer 10

No, you do not need a different control box. If you have the non-Bluetooth Dometic 3316410.012 Thermostat, then you can just replace your current unit with the: - Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR, and…

view full answer...

Answer 11

For your 2020 GMC Sierra 1500 Denali I recommend the Air Lift LoadLifter 5000 Air Helper Springs #AL57388. These air springs provide up to 5,000 pounds of load-leveling capacity to help distribute the weight of your load across all four wheels and…

view full answer...

Answer 12

There are only two wires on the Fan-Tastic Vent Roof Vent w/ 12V Fan part #FV801208, a white wire which is the ground and then a black wire which is the power. The ground wire will need to be ran to a bare metal surface and the power wire will need…

view full answer...

Wiring Diagram for Installing the Replacement Single Zone Thermostat for Dometic RV Air Conditioners

Product Page this Question was Asked From

Continue Researching