Replacement Smoke Lid for a MaxxFan 4500K RV Vent Fan

Question

Question:

hello, i am looking for an universal fit vent lid cover for Maxxfan model 4500K the part # is 12-00057 any clue? thank you

asked by: Waichung

0

Expert Reply:

I do have a few options for you. But we do not have the 12-00057, from what I could find it is a smoke color lid.

We have the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent # MA00-335002 which is a universal style lid in smoke.

We also have the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents # MA10A40009K available in smoke and works with the MA00-04500K.

expert reply by: Scott S

0

Answer 1

It seems you are on the right track. The Replacement Printed Circuit Board #MA10A21276K will indeed be the correct replacement circuit board for your MaxxAir fan. Your serial number indicates the 5100K model fan, which is fairly common.

view full answer...

Answer 2

The Replacement Lid #A10-3376 you're looking at is a generic option made by Dometic and is designed to fit vents with that center lift arm. Since your MaxxFan Plus Roof Vent #MA00-04500K has a different lift design I recommend sticking with the…

view full answer...

Answer 3

Yes, the correct replacement lid cover for your MaxxFan Plus Roof Vent w/ 12V Fan part #MA00-04500K (4951KS) is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K.

view full answer...

Answer 4

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 5

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 6

Hey Paul, we have a Blue Ox base plate kit that fits your 2024 Nissan Versa with the part #BX1856. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle.…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

For the front legs of a Lippert Ground Control 3.0 kit the replacement front jack leg solution you'd need is the part #LC362485. This will allow you to reuse your current motor and bracket. There isn't a gear replacement kit for the jack…

view full answer...

Answer 9

To determine the correct cover, you will need to measure the vent opening. The most common openings are 14 1/4" x 14 1/4", and have vents that are 14" x 14". After you make your measurements, you will need to determine what type…

view full answer...

Replacement Smoke Lid for a MaxxFan 4500K RV Vent Fan

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching