Is The Furrion Vision S FOS43TASF System Compatible With The 5 Inch Monitor?

Question

Question:

I have had this system for 3 years. I have two questions. 1 Is the 5inch monitor compatible with this camera? I see no part number on this camera. 2 I have always felt that the picture was not a clear as I would have preferred. Is this camera related and if so what camera should I replace this with?

asked by: Jon G

0

Expert Reply:

Yes!

Your Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS43TASF will work wonderfully with the Replacement 5" Monitor for Furrion Vision S Wireless RV Camera System # FR97FR.

As far as an unclear picture, I suggest attempting to unpair/pair the camera with the new monitor and see if that resolves the issue first before you replace the camera.

If this does not fix your issue, then I recommend replacing the camera, however instead of replacing the camera separately from the monitor, I suggest taking a look at the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS05TASF.

This is a kit that includes a new camera, as well as the 5" monitor mentioned above. This option is the most cost effective and convenient option, rather than piecing together a kit.

I have also included a couple of videos for you to check out as well.

expert reply by: Bryce D

0

Answer 1

Both the Furrion 5" RV Observation Camera System #FOS05TASF and the 4.3" #FOS43TASF include the same waterproof camera with infrared LEDs to provide nighttime vision. The only differences between the 2 systems have to do with the…

view full answer...

Answer 2

Yes, you can upgrade the 4.3 inch monitor of your Furrion setup to the 7 inch #FR47FR or the #FR97FR for the 5 inch. This will work great and give you an easy to view monitor.

view full answer...

Answer 3

The Replacement 5" Monitor for Furrion Vision S Wireless RV Camera System #FR97FR, the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System #FR47FR, and the Replacement 4.3" Monitor for Furrion Vision S Wireless RV…

view full answer...

Answer 4

The Furrion cameras, like what comes in the part #FOS43TASF that replaced the part you referenced, are only compatible with their specific monitors. If you are looking for a camera system that allows you to use your smartphone as the monitor then I…

view full answer...

Answer 5

Hi Charles, The screws you have in the picture are the ones needed if you were mounting the camera #FOS07TASF into an already mounted shark fin camera mount. If you don't have a prepped trailer with the mounts already in place then you'll…

view full answer...

Answer 6

Yes you can upgrade the 5 inch monitor of your Furrion Vision S system with a 7 inch one with the part #FR47FR and you'd be set.

view full answer...

Answer 7

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Answer 8

Yes, you can use the camera from your 4.3" monitor with the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System part #FR47FR, just go through the pairing process and you're good to go.

view full answer...

Answer 9

Hey Rosemary; I'm happy to verify for you it is compatible. The #FRCBRKT-BL is actually the bracket for the camera but is the Vision S system. But the camera that mounts to that bracket will absolutely work with the Replacement 5" Monitor…

view full answer...