Steering Stabilizer for 2022 Coachman RV Built on 2020 Ford F-53 Chassis

Question

Question:

I’m looking for a steering stabilizer for my class A, would I use the chassis manufacturer year, or the RV manufacturing year. It’s a 2020 chassis, but a 2022 coachman. Thanks.

asked by: Kris K

0

Expert Reply:

The chassis manufacturer year is the correct info to pick out the a steering stabilizer. Since you have a 2020 Ford F-53 chassis the correct steering stabilizer you'd want is the Roadmaster Exact Center part # RM36RR. This specific stabilizer fits all GVWR sizes for

expert reply by: Jameson C

0

Answer 1

The correct steering stabilizer for your 2000 Ford F-53 with 20,500 GVWR is the Roadmaster Exact Center Steering Stabilizer with Custom Brackets for Ford F-53 Chassis, #RM36RR.

view full answer...

Answer 2

I can confirm that the Roadmaster Exact Center Steering Stabilizer with Custom Brackets for Ford F-53 Chassis #RM36RR is in fact correct for your 2022 Coachman Pursuit 31TS on a 2021 Ford F-53 chassis. Per Roadmaster's guidance, you will also…

view full answer...

Answer 3

The Lippert Components RV Spare Tire Carrier part #LC159041 is designed primarily for trailers so it would not be a good choice for your motorhome. The weight of the spare tire, size of the hub pilot, and frame spacing would all be an issue so I…

view full answer...

Answer 4

The Replacement Crank Extension for Lippert Components Spare Tire Winch Assemblies #LC1315411, which is a replacement for Lippert Components Spare Tire Winch with Offset Cable #LC159056, has an inside diameter of 0.50 inches and the hex has a 0.75…

view full answer...

Answer 5

The crank handle for the Lippert Components Spare Tire Winch with Offset Cable item #LC159056, is Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2" item #LC1315411. The Spare Tire Winch item #LC159056 has a 1/2-inch…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Steering Stabilizer for 2022 Coachman RV Built on 2020 Ford F-53 Chassis

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching