Best Industry Standard Rail Kit for a 2014 Chevy Silverado 3500
Question:
I have a 2014 silverado 3500.I also have a 15k pro series Reese hitch w/ 43inch rails. I would like to mount the rails with a 56001 outboard mount,as my frame is already pre drilled for, but Im reading that my rails are not compatible with the mount, and that I would need to get the 30153 rails 49. The videos I watched said the rails are 16k and up. Will my hitch work on these new rails? Curios what the measurements are. Thank you.
asked by: Al
Expert Reply:
Thanks for the picture! What you have read is correct and by taking a look at your picture I can confirm that your current rails will not work with the 56001 Reese Quick-Install Out Board Brackets. There is a Reese Kit available with both the 56001 Brackets and the 30153 rails but I have a better solution. I recommend the Curt Custom Fifth Wheel Installation Kit for Chevy/GMC item # C16411-204. These have an identical installation method as the Reese Quick-Install Custom Outboard Installation Kit item # RP56001-53 but are in stock 6/1/2022 and will save you quite a bit of money. Both of these rails are compatible with your Pro Series hitch. I have linked installation instructions and videos below for both of these rail kits.
To make towing with a 5th wheel easier I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 10' Long item # C56070. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your bumper. This makes hooking up to your 5th wheel trailer easier and more convenient. I have linked an installation video below.
Products Referenced in This Question
Curt Custom Fifth Wheel Installation Kit for Chevy/GMC - Carbide Finish
- Fifth Wheel Installation Kit
- Custom
- Above the Bed
- CURT
more information >
Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long
- Custom Fit Vehicle Wiring
- Fifth Wheel and Gooseneck Wiring
- 7 Feet Long
- Custom Fit
- 7 Round - Blade
- CURT
more information >
Reese Quick-Install Custom Outboard Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches
- Fifth Wheel Installation Kit
- Custom
- Above the Bed
- Reese
more information >
Product Page this Question was Asked From
Reese 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package - 25,000 lbs
- Accessories and Parts
- Fifth Wheel Installation Kit
- Adapters
- Rail Adapter
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Ram Trailer Tow Prep Package
- Q&A: 2019 Ram 2500 OEM Puck System Adapter for RBW Lil' Rocker 5th Wheel Hitch
- Q&A: Adapter Needed To Fit A B&W Patriot Slider Hitch In A 2022 Ram 2500 With OEM Puck System
- Q&A: What Size Trailer Hitch Receiver Opening Comes On a 2024 Chevrolet Silverado 3500?
- Q&A: Mounting Pattern For The Curt CrossWing 5th Wheel Trailer Hitch
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Q&A: Replace RotoFlex with Pin Box That Stays Away From Bed Rails
- Q&A: Do Firestone Ride-Rite Red Label Air Bags Fit 2022 Ford F-350 Dually FX4 4WD
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: 5th Wheel Hitch Installation | The Ultimate DIY Guide
- Article: Trailer Lighting Requirements
- Article: 2011 Chevrolet / GMC Elite Series Fifth Wheel Trailer Hitch and Under-Bed Gooseneck Installation Kit
- Article: Sidewinder with Rotating Turret for Short Bed Pickups