What is Needed to Use Trailer Brake Controller on 2014 Toyota Highlander

Question

Question:

Can I power one of your brake controllers on a 2014 highlander?

asked by: Ken I

0

Expert Reply:

Yes, and to use a brake controller on your 2014 Toyota Highlander you'll need a 7-way, which is what provides the power to the brake controller. First, you'll need a 4-flat, which will activate your trailer's lighting functions, and you'll then plug that into the 7-way. The correct parts are the following:

- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56217

- Universal Installation Kit for Trailer Brake Controller - 7-Way RV # ETBC7

- Curt Assure Trailer Brake Controller # C49UR

- Wiring Adapter # C51515

expert reply by: Kyle S

0

Answer 1

The best option to upgrade from a 4-way to a 7-way on a 2021 Toyota Highlander with minimal modifications required would be to use the 4 to 7-Way with 4-Way Adapter part #ETBC7L. This pairs perfectly with the Curt Echo Wireless Trailer Brake…

view full answer...

Answer 2

There are a few differences between the Universal Installation Kit part #ETBC7 and the 7-Way RV Upgrade Kit part #ETBC7L. The biggest one is that part #ETBC7 comes with both the power and brake output wire you will need to run to the cab/battery…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 6

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

What is Needed to Use Trailer Brake Controller on 2014 Toyota Highlander

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching