Replacement Gear Box and Motor for Lippert 1-065-041012-01

Question

Question:

My landing gear is making a noise and actually stalls out when I’m lifting my 35 foot grand junction 5th wheel. The motor is model 1-065-041012-01. Im thinking the gear box is going bad but would like your input if possible. Also could I replace the motor and gear box with a heavier lift capacity than what is on there?

asked by: Layne B

0

Expert Reply:

The correct replacement for your 1-065-041012-01 motor is part # LC141893 from Lippert which means the correct replacement gear box is the part # LC276602. There isn't a heavier duty option available than what you have currently. If the jacks are hard to crank by hand I would say the problem is the gear box like you mentioned but if they are easy to crank by hand it would be the motor.

expert reply by: Jameson C

0

Answer 1

Yes, the Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies part #LC276602 will work great with the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor part #LC141893.

view full answer...

Answer 2

Thank you for the pictures and information provided. While the Atwood 75721 motor and gear boxes are discontinued, we do have a gear box that will work with your Atwood 75721 motor and landing gear. - Replacement Gearbox for Venture Aluminum Electric…

view full answer...

Answer 3

The correct replacement gear box for the VMC940RB-216761 gearbox on your 5th wheel trailer is the Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies #LC276602. This replacement gear box uses a aluminum body…

view full answer...

Answer 4

What you described does sound like a damaged gear box. This is pretty common for Venture landing gears like what you said you have and the correct solution is a new gear box which the part #LC276602 is the correct replacement for. For a replacement…

view full answer...

Answer 5

The Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear #LC276602 is the one you will need for your 2005 Keystone Sprinter 252RLS 5th wheel. It is a direct replacement for your damaged Venture gear box.

view full answer...

Answer 6

Based on my research, the Replacement Gearbox #LC276602 should work perfectly for your existing Venture Landing Gear. This will replace the gearbox and is designed specifically for the Venture universal-mount landing gear assemblies. It features an…

view full answer...

Answer 7

The Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor #LC141893 is just the motor but if you need to replace the gearbox as well you can do so with part #LC276602.

view full answer...

Answer 8

It sounds like you need a new gearbox for your Atwood landing gear. I recommend the all-aluminum Lippert gearbox #LC276602 which works as a replacement for most brands of landing gear including Atwood, Lippert, and Stromberg-Carlson. The gearbox…

view full answer...

Answer 9

Please refer to the linked photo for guidance in how to wire the landing gear motor switch on your 2007 Keystone Montana 5th wheel to both the motor and trailer battery.

view full answer...

Answer 10

The Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 4-Point Set #LC358590 has 4 35-amp fuses located on the controller. Attched is a complete wiring diagram for you to check out.

view full answer...

Answer 11

Yes, I have attached the wiring diagram of the Replacement Electric Jack Switch with Harness #LC387874 for you to reference. Basically the Blue wire goes to a 6A auto reset breaker, like part #LC134181, which then goes to the positive circuit for…

view full answer...

Answer 12

It sounds like you might have an Ultra-Fab landing gear set. I have included a diagram showing how the system gets wired. On it the white wire is the power wire and the green wire is the ground.

view full answer...