Replacement Water Heater Option For A Atwood GC10A-2 Water Heater

Question

Question:

Looking for a Water Heater Replacement for Atwood GC10A-2

asked by: Amanda V

0

Expert Reply:

For your Atwood GC10A-2, the best replacement I can offer to you is the:

-Dometic RV Water Heater # DMC74FR.

This water heater will fit into cutout dimensions measuring 12-3/4" tall, 12-3/4" wide, and 19-7/8" deep, has a heating capacity of 10,000Btu, a capacity of 6 gallons, and operates on 120 volts.

expert reply by: Bryce D

0

Answer 1

I spoke with a Dometic representative and they do have pin adapters for this specific situation. When Atwood switched to a 10 pin circuit board from 4 pin, they started carrying pin adapters for that specific purpose. The part you need is the…

view full answer...

Answer 2

The rough opening of the Atwood GC10-2E Water heating you are removing is 16" tall X 15-1/2" tall X 20-7/8" deep. The Furrion #FR93FR enclosure measurements (that match the rough opening call) is 12-3/4" wide X 12-3/4" tall X…

view full answer...

Answer 3

Many older Atwood water heaters have been discontinued, the most straight forward replacement for yours currently is the Dometic RV Water Heater - Gas and Electric - Automatic Pilot - 120 Volt - 10,000 Btu - Item #DMC74FR. This is a 6 gallon…

view full answer...

Answer 4

While the Atwood RV Water Heater - Gas and Electric - Automatic Pilot - 120 Volt - 10,000 Btu - 6 Gal Tank, #DMC74FR. Is not considered a direct replacement for the Atwood GC6AA-9E, it can be retrofitted. The needed cutout dimensions are12-3/4"…

view full answer...

Answer 5

To install the Dometic water heater part #DMC74FR in place of your current Dometic setup what you need is the adapter part #DMC24FR and you'd be set.

view full answer...

Answer 6

The best replacement option we offer for an Atwood GC10A-2 RV Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…

view full answer...

Answer 7

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 8

The correct replacement for an Atwood Water Heater GC6AA-9E is the Dometic RV Water Heater part #DMC74FR. This is a 6 gallon water heater that works with both gas and electric just like the one you have so it will be an exact match.

view full answer...

Answer 9

We do carry the Dometic RV Water Heater #DMC74FR which you could use to replace your Atwood G6A-8E 6 gal RV Water Heater, but I highly recommend switching over to a tankless system like the Furrion RV Tankless Water Heater 60,000 BTU #FR98SR. This…

view full answer...

Answer 10

To replace your Atwood RV Water Heater, Model #GC10A-4E, the direct replacement is the Atwood RV Water Heater - Gas and Electric - part #AT94022. This is the new version of your existing water heater, so it will have all the same features like a…

view full answer...

Answer 11

The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…

view full answer...

Answer 12

The only tank equipped RV water heat option we currently offer is the Dometic RV Water Heater part #DMC74FR which is a 120 volt unit with 6 gallon tank and gas/electric operation. In regards to installation, this must be performed by a qualified…

view full answer...