Replacement Keys For A Anderson Rapid Hitch Lock

Question

Question:

Need replacement key #03003 for Anderson Rapid Hitch lock. Can you supply this?

asked by: Ted

0

Expert Reply:

When replacing keys on your Anderson Rapid Hitch Lock # 03003 we do not currently have the keys available for your exact core. The best option that we would have is for you to buy a whole new lock and cutting off the existing lock. The Andersen Trailer Hitch Lock and Adjustment Pin Lock Set - EZ Hitch and EZ HD Ball Mounts - Stainless # AM3493 would be a replacement.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

The Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter - 20,000 lbs #AM3200 uses hitch ball #AM3201 only. It is not compatible with the greaseless AlumiBall #AM3453 which is only compatible with the Rapid Hitch Ball Mount…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 6

Thank you for the images Barb, but you are going to have to take a couple measurements to verify what is going to work best for your exact situation. It looks like you have a 2019 Toyota Tundra with the B&W Turnoverball Underbed Gooseneck Trailer…

view full answer...

Answer 7

We have a great option in a replacement 45 amp power converter for your ELX-45. I suggest the Progressive Dynamics, #PD4045KA. This is a 2-in-1 AC/DC distribution panel and smart charger that works with lithium-ion, flooded lead acid, AGM, and gel…

view full answer...

Answer 8

I have a solution for you, but the short answer is no, it does not. The Replacement Key for Andersen Hitch Receiver Locks and Locking Adjustment Pins #AM3499-2052 is code specific, so the key will only work on locks with a 2052 code. The codes for…

view full answer...

Answer 9

It sounds like you are looking for the replacement key from Reese. Reese is a sister company of Fulton and Tow Ready who is now carrying the Gorilla Guard Coupler Locks #63228 and #63227. Replacement keys are no longer available so replacing the lock…

view full answer...

Answer 10

I do have an option for you but we no longer offer replacement keys for the Trailer Coupler Lock - Gorilla Guard part #63227. If you would like to replace the lock in favor of one with replacement keys, I recommend the etrailer Trailer Coupler Lock…

view full answer...

Answer 11

I contacted Dexter with the serial number from your Dexter Torsion axle on the 2019 Lance 1985. The outer bearing is part #L44649 and the inner bearing is part #L68149 with a Dexter seal 010-019-00 which measures 1.719" inner diameter. You can…

view full answer...

Answer 12

Per the manufacturer the correct kit you would need for your 2011 Lance 1985 Trailer with Dexter Axle #2544334 is The Torflex Lift Kit #K71-707-01. The Lift Kit #K71-707-02 is not the correct kit. This lift kit will raise your trailer frame to…

view full answer...