Replacement Black Trim for Greystone RV Microwave

Question

Question:

Do you have the replacement black trim ring for the graystone RV microwave any more? Thanks.

asked by: Todd W

0

Expert Reply:

It sounds like you're looking for the Replacement Black Trim Kit for Greystone Built-in Microwave # Trim-BL-FR03. I've attached a photo of the dimensions for you to check out. If you are talking about something else please let me know!

expert reply by: Jon G

0

Black Trim Dimensions for Greystone Microwave
(click to enlarge)

Answer 1

I have emailed you a digital copy of the instructions for the Greystone Built-in Microwave with Trim Kit part #324-000105. There are also a set of print instructions which come with the unit. As stated in the instructions, " This microwave oven…

view full answer...

Answer 2

The Greystone Built-in Microwave with Trim Kit part #324-000105 is the best replacement option for an Apollo Microwave AAC24BIB in regards to size. The Greystone Built-in Microwave measures 23-3/8" wide x 15" tall with the trim kit…

view full answer...

Answer 3

We have valve extenders for your dual wheel tires. I recommend the Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Wheel Cover Mount #WM8208. The length of the hoses with straight valve extenders is 13 inches. I've attached…

view full answer...

Answer 4

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

The overall size of the Furrion Over the Range RV Convection Microwave part#FMCM15SS is 29-15/16" wide x 16-3/8" tall x 15" deep and requires a 30" cutout. If this matches the opening and size of the model you have this will be a…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Replacement Black Trim for Greystone RV Microwave

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching